Quick answer
Installing the Strider 14x footrest is a simple swap that lets your child rest their feet while coasting on the 14x in balance bike mode. The process takes just a few minutes and requires only a bolt (not included).
Why use a footrest on a balance bike?
When your child rides the Strider 14x without the Easy-Ride Pedal Kit, there is no place to rest their feet. A footrest gives them a stable spot to put their feet while gliding, which helps them balance and feel more secure. It also keeps their feet from dragging on the ground, reducing wear on shoes and making the ride smoother.
The footrest is designed to fit only when the Pedal Kit is not attached. If you plan to switch between balance bike and pedal bike modes, you'll need to remove the Pedal Kit first.
What you need before starting
The footrest itself is included in the box with your 14x bike. However, the bolt that attaches it to the frame is not included. You will need a compatible bolt — typically the same one used for the Pedal Kit. If you don't have it, check your bike's manual or contact Strider support for the correct size.
Step-by-step installation guide
- Step 1: Remove the Pedal Kit (if attached): If your bike currently has the Easy-Ride Pedal Kit installed, remove it by unscrewing the bolt that holds it to the frame. Set the Pedal Kit and bolt aside. Common mistake: Forgetting that the footrest and Pedal Kit cannot be installed at the same time. The footrest only fits in the same mounting hole.
- Step 2: Position the footrest: Take the footrest and align its mounting hole with the hole on the bike frame where the Pedal Kit was attached. The footrest should sit flush against the frame. Check that the footrest is oriented correctly — the flat part should face upward for your child's foot.
- Step 3: Secure with a bolt: Insert the bolt through the footrest and into the frame. Tighten it firmly using the appropriate tool (typically a hex key or wrench). Do not overtighten, as this could strip the threads. If you don't have the bolt, check your bike's manual for the correct size. Using the wrong bolt can damage the frame or the footrest.
Product facts
-
Footrest for 14x: This is a replacement footrest for Strider 14x Classic and 14x Sport bikes. It fits where the Easy-Ride Pedal Kit fits when the Pedal Kit is not attached. If you lose or break the original footrest, this replacement ensures your child can still enjoy the balance bike mode without buying a whole new bike.
Footrest for 14x
