Start with the AVB network you intend to build

An AVB network needs an intelligent AVB switch once you connect more than two devices. The switch analyzes network traffic and prioritizes critical audio data so the low-latency, high-quality performance AVB is known for can be maintained. The PreSonus SW5E AVB switch is designed for that role, and it also provides Power over Ethernet to devices that can use it, such as the PreSonus EarMix 16M.

Before you run cable, sketch the devices you want on the network and decide which ones need PoE. That sketch will tell you whether the SW5E’s five locking Ethernet connections cover the rig as-is or whether you should plan for expansion.

  • SW5E AVB Network Switch and Bridge: Five locking Ethernet connections, with Power over Ethernet for up to four devices on the network. Locking connections help keep a mission-critical network from being accidentally unplugged, and the PoE budget tells you how many PoE-capable devices you can support without adding another switch.

    SW5E AVB Network Switch and Bridge

    SW5E AVB Network Switch and Bridge

  • SW5E AVB Network Switch and Bridge: An unpowered Link connection makes it easy to add AVB switches as your network needs grow. Plan your first switch around current devices, then use the Link connection to expand rather than replacing the SW5E when the rig grows.

  • SW5E AVB Network Switch and Bridge: Network Activity and Link indicators allow you to verify your network data is flowing correctly. These indicators give you a simple checkpoint during setup and troubleshooting before you assume a device or cable is at fault.

A practical order for connecting the SW5E

  1. Place the switch and plan power: The SW5E has an internal power supply, so there is no wall wart to get bumped from the wall. Give it a stable spot where the locking Ethernet cables can reach your devices without strain.
  2. Connect AVB devices with locking Ethernet: Use the five locking Ethernet connections for your AVB devices. Locking XLR Ethernet connections are intended to ensure your mission-critical network does not get accidentally unplugged.
  3. Reserve PoE for devices that can use it: The SW5E provides Power over Ethernet for up to four devices. Keep that limit in mind when deciding which PoE-capable devices, such as the EarMix 16M, connect directly to the switch.
  4. Use the Link connection for expansion: When you need more ports, add another AVB switch through the unpowered Link connection rather than overloading the first switch.
  5. Verify activity and link status: Check the Network Activity and Link indicators to confirm data is flowing before you move on to configuring or troubleshooting individual devices.

Compatibility and placement checks before you power up

  • Confirm your devices are AVB-capable: The SW5E is an AVB switch, and the supplied information describes it as fully compliant with the AVB standard. It is intended for AVB devices, not as a general-purpose switch for arbitrary network gear.
  • Count PoE devices against the four-device limit: The switch provides PoE for up to four devices. If more than four of your devices rely on PoE, the supplied information does not describe how to extend that budget beyond adding switches, so plan the port assignment deliberately.
  • Leave room for locking connectors: Locking XLR Ethernet connections need space to engage and release. Avoid tight bends or crowded rack positions that make it hard to seat or remove a cable.
  • Check the Link path for future growth: If you expect to add StudioLive Series III ecosystem products later, note where the unpowered Link connection will sit so expansion does not force a full re-cable.

Where the SW5E fits in a StudioLive Series III rig

StudioLive Series III networked products form an ecosystem that is easily expanded and quickly configured. The SW5E provides connections for up to five StudioLive Series III ecosystem products and can be expanded as your needs grow. That makes it a natural starting point when you are connecting a StudioLive Series III mixer, a stage box, and personal monitoring devices on one AVB network.

The supplied information does not list specific NSB stage box models as SW5E-compatible, so treat any NSB connection as an AVB device you need to confirm against your own system documentation. What the SW5E does provide is the AVB switching, PoE, locking connections, and expansion link described above.

Build quality for live and touring use

  • SW5E AVB Network Switch and Bridge: The SW5E is described as providing stable AVB networking in a rugged design that will hold up to the rigors of live sound and touring. This is a manufacturer description of intended durability, not a test result. It tells you the switch is aimed at portable and live use, but you should still protect it in transit and avoid unnecessary strain on the locking connectors.

What the supplied information does not cover

  • No port-by-port configuration steps: The supplied record does not include a management interface walkthrough, VLAN settings, or a specific cable-distance limit. Those details are not confirmed here, so do not treat this guide as a substitute for the manufacturer’s setup documentation.
  • No promised audible improvement: The SW5E is described as supporting the low-latency, high-quality performance for which AVB is known. That is a manufacturer claim about the AVB standard and switch design, not a guarantee that your system will sound better than another compliant setup.
  • No specific NSB model compatibility list: The supplied evidence mentions the EarMix 16M as a PoE example and StudioLive Series III ecosystem products generally. It does not name individual NSB stage boxes, so verify those connections against your own device documentation.