Team Embroidery Tee Care and Styling FAQ
What is the Team Embroidery Tee made of?
The tee is made from 22 singles 100% cotton combed ring spun fine jersey, weighing 175 grams (5.2 ounces). It has a set-in collar with a ¾” rib height, taped shoulder to shoulder, and an etnies woven clamp label. The print uses light touch plastisol ink.
How should I wash the Team Embroidery Tee to protect the embroidery?
To protect the embroidery and print, turn the tee inside out before washing. Use cold water and a gentle cycle. Avoid bleach and fabric softeners, which can break down the cotton fibers and the plastisol ink. Wash with like colors.
Can I machine dry the Team Embroidery Tee?
Air drying is recommended to prevent shrinkage and preserve the embroidery. If you must machine dry, use the lowest heat setting and remove the tee while it is still slightly damp. High heat can shrink the 100% cotton fabric and damage the embroidery threads.
How do I remove wrinkles from the embroidered area?
Iron the tee inside out on a low to medium setting. Avoid direct contact between the iron and the embroidery. For the embroidered area, place a thin cloth between the iron and the tee to protect the threads. Do not steam the embroidery directly, as moisture can distort the stitches.
Will the embroidery fade or unravel over time?
With proper care, the embroidery should hold up well. The light touch plastisol ink print is durable, but the embroidery threads may show wear with frequent washing or abrasion. Turn the tee inside out, wash on gentle cycle, and air dry to extend the life of both the embroidery and the print.
What sizes and colors are available for the Team Embroidery Tee?
The Team Embroidery Tee is available in WHITE/BLACK colorway. Sizes offered are S, M, L, XL, and XXL.
How should I style the Team Embroidery Tee for skating or casual wear?
The tee's classic white and black colorway pairs well with denim, chinos, or skate shorts. The set-in collar and taped shoulders give it a clean, structured look. For skating, layer it under a hoodie or flannel. The 100% cotton fabric breathes well during activity.
Can I iron directly over the embroidery?
No. Always iron the tee inside out and avoid direct contact with the embroidery. If you need to iron the embroidered area, use a pressing cloth. Direct heat can melt the embroidery threads or cause them to lose their shape.
Key Construction Details
-
Team Embroidery Tee: 22 singles 100% cotton combed ring spun fine jersey, 175 grams (5.2 ounces) The combed ring spun cotton is softer and more durable than standard cotton, while the 175g weight makes it a substantial tee that holds its shape.
Team Embroidery Tee
-
Team Embroidery Tee: Set-in collar with ¾” rib height, taped shoulder to shoulder The set-in collar resists stretching, and the taped shoulders prevent the seams from pulling apart during skating or frequent wear.
-
Team Embroidery Tee: Light touch plastisol ink Plastisol ink creates a soft feel on the fabric and is more flexible than heavier inks, reducing the chance of cracking during movement.



