Teris TS-BA75 bowl adapter: fit and capacity questions

What does the TS-BA75 actually do?

It is an aluminum bowl adapter that sits in a compatible 100mm tripod bowl and provides a reduced 75mm interface for a smaller bowl-mounted fluid head. In practice, it lets you use a 75mm fluid head on a 100mm bowl tripod without changing the tripod.

Will the TS-BA75 fit every 100mm tripod?

No. The record specifies a compatible Teris 100mm bowl tripod, and bowl diameter alone does not guarantee a complete fit. Tie-down clearance and the overall geometry of the head and tripod should be confirmed before ordering. If either interface is not 100mm-to-75mm, choose a different adapter or use the native bowl size.

What is the listed load capacity, and does it cover my whole rig?

The listed capacity is 110.2 lb / 50 kg, but that figure is subject to the limits of the tripod, head, tie-down hardware, and the complete support system. Weigh your camera package and check every component in the chain, not just the adapter.

Can I use the TS-BA75 with a non-Teris fluid head?

The record describes the adapter for use with a compatible 75mm bowl fluid head and a compatible Teris 100mm bowl tripod. It does not confirm universal head compatibility. Send the tripod and fluid-head models to Filmgear Canada so the 100mm-to-75mm interface and tie-down clearance can be reviewed before you buy.

TS-BA75 evidence that decides the fit

  • Teris TS-BA75 100mm to 75mm Bowl Adapter: Teris TS-BA75 is an aluminum bowl adapter that converts a compatible 100mm tripod bowl to a 75mm fluid-head interface. This is the core job of the part: it changes the bowl size, not the tripod or head.

    Teris TS-BA75 100mm to 75mm Bowl Adapter

    Teris TS-BA75 100mm to 75mm Bowl Adapter

  • Teris TS-BA75 100mm to 75mm Bowl Adapter: Listed load capacity: 110.2 lb / 50 kg. Use it as a starting ceiling, then confirm the tripod, head, and tie-down limits for your full camera package.

  • Teris TS-BA75 100mm to 75mm Bowl Adapter: Weight: 1.1 lb / 499 g. The adapter adds little weight, so the payload question is mainly about your camera and head, not the adapter itself.

Teris TS-L10 L-shape plate: portrait support questions

What is the TS-L10 used for?

The TS-L10 is an L-shape camera support plate designed to reposition a mounted camera for portrait-orientation shooting on compatible tripod-head setups. It uses an adjustable L-shaped frame with slotted mounting positions for balancing and aligning the camera in portrait orientation.

Does the TS-L10 fit every camera and head?

Fit depends on the camera mounting threads, body clearance, plate position, and head interface. The record does not confirm universal compatibility. Confirm these points before ordering, and send the camera model, head model, and a photo of the mounting surfaces for a pre-order fit review.

What is the listed payload for the TS-L10?

Teris lists a 10 kg / 22 lb payload, subject to correct mounting and balance. The camera, tripod head, and additional mounting hardware are not included unless listed on the order.

Is the TS-L10 a quick-release plate?

It is an L-shape support bracket. Whether it works as part of a quick-release system depends on the head and plate interface used with it. For landscape-only work, a standard flat quick-release plate is the simpler choice; for exact body fit, connector clearance, or accessory mounting, a camera-specific cage or dedicated vertical plate may be better.

TS-L10 evidence for portrait-orientation setups

  • Teris TS-L10 L-Shape Plate: Teris TS-L10 is an L-shape camera support plate for portrait-orientation shooting on compatible tripod-head setups. It solves the vertical-video problem while keeping the camera supported by a tripod or fluid head.

    Teris TS-L10 L-Shape Plate

    Teris TS-L10 L-Shape Plate

  • Teris TS-L10 L-Shape Plate: Listed payload: 10 kg / 22 lb. Check your camera, lens, and accessories against this figure before relying on the plate for vertical work.

  • Teris TS-L10 L-Shape Plate: Adjustment: slotted base and vertical plate. Slotted positions give you room to balance the camera in portrait orientation, but they do not replace checking head interface and clearance.

How to check fit before you order either part

For the TS-BA75, start with the bowl sizes: the tripod bowl must be 100mm and the fluid head must be 75mm. Then confirm tie-down clearance and total payload, because bowl diameter alone does not guarantee a complete fit. If your tripod and head are already the same bowl size, use the native bowl size instead of an adapter.

For the TS-L10, start with the camera base and the head interface. The plate is an L-shape bracket, not a universal quick-release solution, so the camera mounting threads, body clearance, and plate position all matter. A photo of the camera base and head is the fastest way for Filmgear Canada to review compatibility before you order.