Quick answer
Clean your THING Focus Spinner Copper with a soft cloth and mild soap when needed, embrace the patina as a natural finish, and keep the hybrid ceramic R188 bearing dry and debris-free for consistent spins.
Why copper needs a different approach
Copper develops a patina over time as it reacts with air and oils from your hands. This is normal and often desired, but it means you should avoid harsh chemicals that strip the surface unevenly. The THING Focus Spinner Copper is machined from solid copper, so the patina will deepen with use. If you prefer a polished look, you can maintain it with gentle polishing, but frequent polishing removes the protective layer and can alter the finish over time.
When to clean and when to leave it alone
Clean your spinner when you notice sticky residue, reduced spin performance, or a buildup of dirt in the bearing area. For everyday handling, a quick wipe with a dry soft cloth is enough. Avoid submerging the spinner in water, as moisture can compromise the bearing. If you use a polishing cloth, do so sparingly and only on the copper body, not on the bearing.
Step-by-step care routine
- Wipe down after use: After each day of use, wipe the copper body and buttons with a soft, dry microfiber cloth to remove oils and fingerprints. Avoid using paper towels, which can leave lint or micro-scratches. A daily wipe prevents grime buildup and keeps the patina even.
- Clean the bearing area gently: If spin feels rough, use a can of compressed air to blow out dust from the bearing gap. Do not use water or liquid cleaners, as they can wash out lubricant and cause rust. For stubborn debris, a dry cotton swab can help, but avoid pressing hard on the bearing. Never submerge the spinner; moisture is the enemy of smooth spins.
- Address patina intentionally: If you want to slow patina, store the spinner in a dry, airtight container when not in use. If you prefer a polished look, use a copper polishing cloth sparingly on the body only, then wipe off residue. Avoid polishing the bearing or threaded areas. Polishing removes a tiny layer of copper, so do it infrequently to preserve dimensions.
- Check and maintain the bearing: Periodically test spin time. If it drops noticeably, the bearing may need cleaning. Use only a few drops of isopropyl alcohol to flush the bearing (if you are comfortable disassembling), then let it dry completely before reassembling. Do not over-lubricate; the hybrid ceramic bearing is designed to run dry or with minimal lubricant. Less is more: excess oil attracts dust and slows the spin.
Product facts
-
The THING Focus Spinner Copper: Machined from solid copper with a proprietary retainer system and hybrid ceramic R188 bearing. The copper body will patina naturally, while the ceramic bearing resists corrosion but still needs to stay dry and clean for optimal spin.