Start with the footprint before you pick a spot
The THUMPER XL is the largest rabbit hutch in the range, so the first job is finding a patch of ground that genuinely fits it rather than one that almost does. Including overhangs, it measures (L) 190cm (W) 67cm (H) 75cm, while the living space itself is (L) 180cm (W) 60cm (H) 60cm. The hutch is raised 10cm off the ground.
Those figures do double duty for placement. You need the full 190cm by 67cm clear for the structure, plus room to open the two roof sections and the large doors without backing into a fence, shed wall or hedge. Walk the route from gate to final position as well; a hutch this long is awkward to shuffle once it is loaded.
A placement routine that uses the hutch as built
The order below follows the features the hutch actually has, so each step solves a real handling problem rather than a generic one.
- Level the ground under the adjustable feet: The feet are capped with adjustable, rot-free plastic boots. Set the hutch on firm, level ground and use that adjustment to take out wobble. A hutch that rocks is harder to clean and less pleasant for the rabbit.
- Keep the raised base clear: The 10cm gap under the hutch is part of the design, intended to lift the living space away from cold and damp. Do not block it with stored bedding, bricks or long grass; leave airflow beneath the floor.
- Choose shelter from prevailing wind and rain: The hutch is raised to keep away cold and damp, but the supplied information does not describe a waterproof roof covering. Position the hutch so its solid sides and roof take the worst of the weather, and consider the rain cover listed as available if the site is exposed.
- Leave working room at the doors and roof: The doors measure (W) 49cm (H) 54cm, and both roof sections open. Give yourself standing space in front of the doors and enough clearance above to lift the roof panels fully.
- Plan the run from the door outward: The record does not include a run with this hutch, so treat the run as a separate layout decision. Site the hutch so a run can attach or sit alongside the door side, and keep the route between hutch and run short and clear.
The THUMPER XL details that shape the setup
-
THUMPER XL Rabbit Hutch: Dimensions including overhangs: (L) 190cm (W) 67cm (H) 75cm; living space (L) 180cm (W) 60cm (H) 60cm; raised 10cm off the ground. These are the numbers for marking out the site and checking door and roof clearance before the hutch arrives.
THUMPER XL Rabbit Hutch
-
THUMPER XL Rabbit Hutch: Two slide-out metal-lined trays, large doors and two opening roof sections. Cleaning access comes from above and from the front, so the hutch needs clear space on both sides of that routine.
-
THUMPER XL Rabbit Hutch: Thick 3mm coated and embedded wire described as highly predator resistant. The mesh is a security feature, but it does not replace checking the ground, latches and surrounding fence line at the chosen position.
-
THUMPER XL Rabbit Hutch: Adjustable rot-free plastic feet and a separate quiet area inside. The feet help with levelling on uneven ground, and the quiet area gives the rabbit somewhere to retreat when the hutch is in an exposed spot.
Winter preparation: what the hutch supports and what it does not
The THUMPER XL is raised to keep away cold and damp, and the plastic feet are described as rot-free, which is useful in a wet British winter. Beyond that, the supplied information does not include winter-specific instructions, insulation guidance or a statement that the hutch is weatherproof on its own. Do not assume the roof or panels are sealed against driving rain.
A rain cover is listed as available for this hutch. That is the clearest supplied winter measure: fit the cover if the hutch sits in an exposed position, and keep the raised base and ventilation clear rather than wrapping the hutch tightly. The two opening roof sections and large doors also make it easier to check bedding and clean trays on short winter days, when damp bedding is the thing you most want to catch early.
Placement trade-offs worth weighing before winter
There is no single correct position. The right spot balances shelter, access and the rabbit's daily routine.
- Sheltered against a wall: Good wind protection and easier access to doors, but check that rain running off a roof or wall does not pour onto the hutch, and that the raised base still has airflow.
- Open lawn position: Better airflow and easier run layout, but more exposed to wind and driving rain. This is where the available rain cover earns its place.
- Under trees: Useful shade and shelter, but fallen leaves and debris collect around the raised base and trays. Plan to clear them regularly.
- On a patio or hard standing: Easier to level with the adjustable feet and simpler to keep clean around the hutch, but colder underfoot in winter and less natural for a run.
Winter checkpoints for this hutch
These checks follow the features the hutch provides. They are not a substitute for veterinary advice if a rabbit seems unwell in cold weather.
- Clear the 10cm raised gap: Remove leaves, snow and stored items from under the hutch so the raised floor can do its job.
- Check the plastic feet: Re-level the hutch if the ground softens, and check the rot-free feet for movement or damage.
- Keep trays moving freely: The two metal-lined trays slide out for cleaning. In freezing weather, clean before bedding freezes to the tray rather than forcing it.
- Inspect the wire and latches: The 3mm coated and embedded wire is a predator-resistant feature, but check it and the door fittings as part of your winter routine.
- Use the quiet area: Make sure the separate quiet area stays dry and draught-free so the rabbit has a retreat on stormy nights.



