Three Titanium Watch Straps for the Field
PDW offers three distinct watch straps built around non-magnetic titanium hardware: the Ti-Ring Strap, the Ti-FXDS Strap, and the Ti-HDR Strap. All three eliminate magnetic interference from rare earth magnets found in everyday carry items, but they differ in construction, closure, and lug width availability.
Choosing the right one depends on your watch's lug spacing, whether you prefer a traditional NATO double-pass or a single-pass hook-and-loop design, and how much hardware you want on your strap.
Construction and Closure Differences
The Ti-Ring Strap uses a classic NATO double-pass design with two titanium rings and a tang buckle. The strap threads under the watch case, providing a fail-safe if a spring bar fails.
The Ti-FXDS Strap is a single-pass strap with a Grade 5 titanium buckle and a high-cycle hook-and-loop closure. It keeps the watch lower on the wrist and is compatible with both fixed-bar and spring bar watches.
The Ti-HDR Strap is a heavier-duty NATO-style strap with thicker titanium rings and buckle, and a wider, more pliable nylon weave. It maintains the classic double-pass security.
- Ti-Ring Strap: NATO double-pass with shaped titanium rings and tang buckle. Available in 20mm and 22mm widths.
- Ti-FXDS Strap: Single-pass elastic webbing with hook-and-loop closure and Grade 5 titanium buckle. Available in 20mm width only.
- Ti-HDR Strap: Heavier-duty NATO double-pass with thicker titanium rings and buckle. Available in 20mm and 24mm widths.
Lug Width Compatibility
Lug width is the first filter. The Ti-Ring Strap fits watches with 20mm or 22mm lugs. The Ti-HDR Strap fits 20mm or 24mm lugs. The Ti-FXDS Strap is offered only in 20mm.
If your watch has 22mm lugs, the Ti-Ring Strap is your only option among these three. For 24mm lugs, the Ti-HDR Strap is the choice. For 20mm lugs, all three are available, so your decision comes down to construction preference.
Non-Magnetic Hardware Evidence
-
Ti-Ring Strap 22mm - OD Green: The Ti-Ring Strap uses custom machined titanium keepers and buckle that are 100% non-magnetic and corrosion-proof. Prevents magnetic interference with strap-mounted compasses and protects mechanical watch movements from magnetization.
Ti-Ring Strap 22mm - OD Green
-
Ti-FXDS Strap 20mm - Tracer Reg: The Ti-FXDS Strap uses a Grade 5 6AL-4V titanium buckle that is fully non-magnetic and corrosion-proof. Eliminates compass needle deviation and resists saltwater corrosion for dive watch use.
Ti-FXDS Strap 20mm - Tracer Reg
-
Ti-HDR Strap 20mm - OD Green: The Ti-HDR Strap uses heavier gauge titanium rings and buckles that are 100% non-magnetic and corrosion-proof. Offers the same magnetic safety with a more robust hardware profile for demanding field conditions.
Strap Length and Wrist Fit
The Ti-Ring Strap has an overall length of 315mm and fits XS to XL wrists. The Ti-HDR Strap is 305mm long and also fits XS to XL. The Ti-FXDS Strap comes in two lengths: Regular (285mm) for 7–8 inch wrists, and Short (255mm) for 6–7 inch wrists.
If you have a smaller wrist, the Ti-FXDS Short length offers a more tailored fit. The Ti-Ring and Ti-HDR straps use a standard tang buckle with 16 adjustment holes, giving you fine adjustment across a wide range.
Which Strap Should You Choose?
For a traditional NATO feel with fail-safe security, choose the Ti-Ring Strap if your watch has 20mm or 22mm lugs. For a heavier-duty version with thicker titanium hardware, the Ti-HDR Strap suits 20mm or 24mm lugs.
For a low-profile single-pass design with quick adjustment and stretch webbing, the Ti-FXDS Strap is ideal for 20mm lug watches, especially those with fixed bars like the Tudor FXD. Its hook-and-loop closure is rated for over 13 years at twice-daily cycling.
All three straps are built with non-magnetic titanium hardware to protect your watch and compass, making them suitable for field, dive, and EDC use.


