What You Get in the Box

The Too Hot to Handle Thrusting Machine is a rechargeable, splashproof device with a detachable silicone shaft. The main barrel houses a thrusting motor, while the shaft contains its own vibration motor and a heating element. A suction cup mount at the base lets you attach the machine to smooth surfaces for hands-free use.

Step-by-Step Setup

Follow this sequence to get the machine ready for your first session.

  1. Charge the device: Use the included magnetic rechargeable USB cable. Connect it to the charging port and wait until the battery is full. The LED lights on the control panel illuminate when buttons are in use.
  2. Attach the shaft: Click the sleek silicone shaft into the main barrel until it locks. The shaft is textured for extra stimulation and stores inside the handle after use.
  3. Secure the suction cup: Press the adjustable suction cup mount onto a clean, smooth surface (tile, glass, or a flat table). Push out any air to create a strong hold. The mount is covered with a cap when not in use.
  4. Power on and select functions: Use the 3-button control panel to access each motor separately. Choose from 7 thrusting speeds (with over half an inch of push) and 7 vibration speeds. A separate button activates the heating function, which warms up to a maximum temperature of 35 degrees.

Using the Suction Cup Mount for Positioning

The suction cup mount is the key to hands-free play. Attach it to a wall, floor, or any smooth, non-porous surface. Adjust the angle so the thrusting shaft aligns with your body. Because the machine is over 1 lb in weight, ensure the surface is sturdy enough to support it without tipping.

Cleaning and Storage

After use, detach the silicone shaft and clean it with warm water and mild soap or a toy cleaner. The machine is splashproof, so avoid submerging the motor. Store the shaft inside the unscrewable handle and cover the thruster and suction mount with the included caps. The device is made from silicone and ABS plastic, and is phthalate and latex free.

Key Specs at a Glance

  • Too Hot to Handle Thrusting Machine: Toy Height: 9.3”, Depth: 5.2”, Width: 2.2”. Attachment Height 6.15", Depth 1.35", Width 1.38". Weight: Over 1 lb. These dimensions help you decide where to place the machine and whether the suction cup mount will fit your intended surface.

    Too Hot to Handle Thrusting Machine

    Too Hot to Handle Thrusting Machine

  • Too Hot to Handle Thrusting Machine: Thrusting, heating, vibrating machine with 7 speeds for both thrusting and vibration. Heating function max temperature 35 degrees. You get three separate sensations in one device, and the heating function adds internal warmth without exceeding a safe temperature.

  • Too Hot to Handle Thrusting Machine: Adjustable suction cup mount. Caps to cover thruster and suction mount. Splashproof and easy to clean. The suction cup allows versatile positioning, and the splashproof design makes cleaning straightforward without worrying about water damage.

What the Record Doesn't Settle

The supplied information does not specify recommended thrusting speeds for different activities, nor does it provide detailed instructions for the heating function beyond the maximum temperature. The device is splashproof but not waterproof, so avoid full submersion. Always test the suction cup hold before full use to ensure it's secure.