Understanding Your TOTEM Sconce’s Materials

The TOTEM Sconce is made from Engineered Polymer with a brushed satin nickel backplate. This combination gives it a sculptural, depth-filled look while being lighter than metal. The care approach differs from a traditional metal or glass fixture—the polymer surface is durable but can be scratched by abrasive cleaners or rough cloths.

The sconce is hardwired and UL/cUL listed, meaning it meets safety standards for permanent installation. Before any cleaning, ensure the power is off at the circuit breaker to avoid electrical risk. This is not just a safety step; it also prevents dust from being attracted to static charge on the polymer.

Key Specifications That Influence Care

  • TOTEM Sconce: MATERIALS: Engineered Polymer, Steel Engineered polymer is less porous than natural stone or wood but can be dulled by harsh chemicals. Stick to mild soap and water.

    TOTEM Sconce

    TOTEM Sconce

  • TOTEM Sconce: LIGHT SOURCE: G8 6W, 90+ CRI, 600 lm, Dimmable The G8 bulb is a specific size and base type. When replacing, only use a G8 LED bulb rated for the fixture’s 7W max to avoid overheating.

  • TOTEM Sconce: DIMENSIONS: L 3.7" x W 5" x H 9.8" The compact size means you can reach all surfaces easily, but the curved design has recesses where dust can collect—pay extra attention there.

How to Clean the TOTEM Sconce Safely

Follow these steps to clean the polymer surface and brushed nickel backplate without damaging the finish.

  1. Turn off power: Switch off the circuit breaker that controls the sconce. Wait a few minutes for the bulb to cool completely.
  2. Dust first: Use a soft, dry microfiber cloth to gently wipe the curves and crevices. This removes loose dust before any damp cleaning, reducing the risk of streaking.
  3. Damp clean the polymer: Lightly dampen a clean microfiber cloth with water and a drop of mild dish soap. Wipe the polymer surfaces gently. Avoid saturating the cloth—excess moisture can seep into the fixture.
  4. Dry immediately: Use a separate dry microfiber cloth to buff the surface dry. This prevents water spots on the brushed nickel backplate and keeps the polymer finish even.
  5. Clean the backplate separately: For the brushed satin nickel backplate, use a dedicated metal-safe cleaner or just a damp cloth. Avoid abrasive pads that can scratch the satin finish.

Bulb Care and Replacement

The TOTEM uses a G8 socket rated for a maximum of 7W. The supplied G8 6W LED bulb is dimmable, 90+ CRI, and outputs 600 lumens. When the bulb eventually needs replacing, only use a G8 LED bulb that does not exceed 7W. A higher wattage could damage the socket or the fixture’s wiring.

To replace the bulb, ensure power is off. Gently pull the old bulb straight out of the socket—do not twist. Insert the new G8 bulb by aligning the pins and pushing firmly until it seats. If the bulb feels loose or the pins don’t align, stop and check the base type again.

What to Avoid

Do not use ammonia-based glass cleaners, bleach, or abrasive powders on the polymer or nickel surfaces. These can cause discoloration or dull the satin finish. Similarly, avoid scouring pads, steel wool, or scrub brushes.

The fixture is hardwired and not designed for frequent removal. Cleaning in place with the power off is the safest approach. If the sconce is installed in a high-moisture area like a bathroom, use a drier cleaning method—excess humidity can affect the electrical components over time.