Quick Answer
To customize your Trea Lab Chair, start by assessing your workspace and daily tasks, then use the configurator to select the right base, backrest, and armrest options. Prioritize adjustability and easy-to-clean materials, especially for healthcare environments. Always test the chair with your actual work surface height to ensure proper posture.
When you spend long hours at a lab bench or in a clinical setting, the right chair can make a real difference in comfort and focus. The Trea Lab Chair Configurator from Humanscale lets you tailor an ergonomic chair to your specific needs, whether you're in a research lab, a medical office, or a dental suite.
Humanscale
This guide walks you through the key decisions you'll make when configuring your chair. You'll learn what to consider for your work environment, how to avoid common mistakes, and why certain options matter more than you might think.
Start with Your Workspace and Tasks
Before you open the configurator, take a close look at your workspace. Measure your work surface height and note whether you sit for long stretches or move between stations. A lab bench often requires a taller chair than a standard desk, while a dental office may need a chair that can be adjusted quickly between patients.
Think about your typical movements. Do you need to roll between counters or reach across a table? Do you work with equipment that requires a specific seating height? Answering these questions first will make the configurator easier to navigate and help you avoid choosing options that don't fit your daily routine.
- Measure your work surface height before choosing a chair height range.
- Consider whether you need mobility or stability for your tasks.
Choose the Right Base and Height Range
The base and height adjustment are the foundation of your chair. For lab and healthcare settings, a height range that matches your bench or counter is essential. If you'll be sitting at a standard desk, a lower range might be more appropriate. If you're at a raised lab bench, look for a higher range.
A common mistake is choosing a chair with too limited a height range. Your feet should rest flat on the floor with your knees at a 90-degree angle. If the chair doesn't go low enough or high enough, you'll end up compensating with poor posture. Take the time to match the range to your actual work surface.
- Make sure the height range lets you keep your feet flat and knees at 90 degrees.
- If you share the chair, choose a wider height range to accommodate different users.
Select Backrest and Armrest Options
Your backrest and armrests play a big role in daily comfort. A backrest that supports your lower back helps reduce strain during long tasks. Armrests can relieve pressure on your shoulders and neck, but they need to be positioned so your elbows stay close to your body at a 90-degree angle.
In a lab or healthcare setting, you might prefer armrests that are adjustable or removable to allow closer access to your work surface. Think about whether you need full arm support or whether you'll be moving your arms frequently. The Trea Lab Chair Configurator lets you choose options that match your work style.
- Adjustable armrests can help if you switch between typing and bench work.
- If you need to get close to a counter, consider armrests that can be moved out of the way.
Consider Materials and Cleanability
For lab, medical, and dental environments, cleanability is often as important as comfort. Spills, disinfectants, and daily wear mean your chair needs to handle frequent cleaning. Look for materials that are easy to wipe down and resistant to stains.
The Trea Lab Chair is part of a collection designed for these settings, so you can expect a focus on durability and easy maintenance. When configuring, consider the upholstery and frame materials. A chair that's hard to clean will quickly become a hygiene issue, so prioritize materials that match your facility's protocols.
- Check that the chair's materials can withstand your cleaning products.
- Choose darker or patterned fabrics if stains are a concern.
Step-by-Step Customization Checklist
- Measure your workspace: Measure your work surface height and note how you move around during the day. This tells you the height range and mobility you need. Checkpoint: Your chair should let you sit with feet flat and knees at 90 degrees.
- Pick your base and height range: Choose a base that suits your floor type and a height range that matches your bench or desk. Consider a wider range if you share the chair. Checkpoint: Avoid a too-narrow height range that forces poor posture.
- Choose backrest and armrests: Select a backrest that supports your lower back and armrests that you can adjust to keep elbows at 90 degrees. For bench work, consider removable or adjustable armrests. Checkpoint: Test that armrests don't block you from getting close to your work surface.
- Select materials for cleanability: Pick upholstery and frame materials that can handle frequent cleaning and disinfecting. This is critical for lab and healthcare settings. Checkpoint: Verify the materials work with your facility's cleaning products.
- Review and order: Double-check your selections against your workspace measurements and daily tasks. Confirm that the chair meets your ergonomic needs before finalizing. Checkpoint: Make sure you haven't missed any must-have options for your work.
Product Facts
- Trea Lab Chair Configurator: The Trea Lab Chair Configurator from Humanscale allows you to customize your ergonomic seating experience. Designed for modern workspaces, this chair offers a range of options to suit your preferences. This means you can build a chair that fits your body and your work environment, rather than settling for a one-size-fits-all model.
- Lab & Healthcare Collection: Discover Humanscale's Lab & Healthcare Seating–ergonomic chairs for laboratory, healthcare, and clinical environments, built for comfort, durability, and easy cleanability. If you work in a lab or medical office, this collection confirms that the Trea Lab Chair is designed with your specific needs in mind, including hygiene and long shifts.
Customizing your Trea Lab Chair is about matching the chair to your work, not just picking features. By measuring your space, choosing the right height and support options, and prioritizing cleanable materials, you can build a chair that supports your comfort and productivity for years to come.
