What the o18 IR Transmitter Does
The littleBits o18 IR Transmitter sends a short pulse of modulated infrared light. It is designed to wirelessly activate the AC switch, turning appliances like a lamp or fan on and off. You trigger it using an input module, such as a button.
Common Issue: No Signal from the Transmitter
If your IR transmitter does not seem to be sending a signal, start by checking the power supply. Ensure the power Bit is properly connected and the blue power LED is lit. Then confirm that the input module (e.g., a button or toggle switch) is connected correctly and functioning. Press the button or activate the switch to see if the transmitter responds.
Step-by-Step Diagnostic Check
Follow these steps to isolate the problem:
- 1. Verify power flow: Connect a simple output Bit (like an LED) in place of the IR transmitter. If the LED lights when you trigger the input, power is reaching the output position.
- 2. Test the input module separately: Swap the input module with a known working one (e.g., a button you have used before). If the transmitter now works, the original input may be faulty.
- 3. Check module orientation: Make sure all Bits are snapped together with the arrows pointing in the correct direction. A reversed module will not transmit power or signal.
- 4. Inspect the IR transmitter itself: Look for any visible damage to the Bit. If the Bit appears intact but still does not work after the above checks, it may need replacement.
o18 IR Transmitter at a Glance
-
littleBits o18 IR Transmitter: The IR transmitter sends a short pulse of modulated infrared light. You can activate it with a trigger from an input module (like a button). This tells you the Bit needs an input signal to work. If no input is connected or the input is not sending a signal, the transmitter will not emit IR.
littleBits o18 IR Transmitter
-
littleBits o18 IR Transmitter: Use it to wirelessly activate the AC switch to turn appliances like a lamp or fan on and off! The intended receiver is the AC switch. If the transmitter works but the appliance does not respond, the AC switch or its pairing may be the issue.
What to Do If the Transmitter Still Doesn’t Work
If you have completed the diagnostic steps and the transmitter still does not send a signal, the Bit may be defective. Since the supplied information does not include repair instructions or detailed specifications, the most reliable next step is to replace the Bit with a new littleBits o18 IR Transmitter. Always use genuine littleBits modules to ensure compatibility and safety.
