Start with the two mounts, not the tripod legs
The Ulanzi MT-44M is a 2-in-1 selfie stick tripod. That means it can work as a handheld stick or as a free-standing tripod, but the part that really shapes your setup is the mounting system. This model gives you a magnetic mount and a 1/4" connection. Before you extend anything, decide which mount your phone or accessory will use. That single choice determines how quickly you can switch setups later.
The magnetic side is designed for compatible mounting options, while the 1/4" connection accepts accessories with a standard 1/4" screw. The supplied product information does not list specific phone models, magnetic plate requirements, or load limits, so treat the mount as a starting point and test your own gear before relying on it for a shoot.
What the MT-44M actually provides
-
Ulanzi MT-44M 2-in-1 Magnetic & 1/4" Selfie Stick Tripod: 2-in-1 design: magnetic mount plus 1/4" mount You get two ways to attach gear, so you can choose the one that matches your phone or accessory instead of forcing a single connection.
Ulanzi MT-44M 2-in-1 Magnetic & 1/4" Selfie Stick Tripod
-
Ulanzi MT-44M 2-in-1 Magnetic & 1/4" Selfie Stick Tripod: Functions as a selfie stick and a tripod The same tool covers handheld vlogging and hands-free framing, which cuts down on gear you need to carry.
-
Ulanzi MT-44M 2-in-1 Magnetic & 1/4" Selfie Stick Tripod: Available color option: White Color is the only variant listed, so the white finish is part of the product identity rather than a separate model.
A practical setup sequence for the MT-44M
The supplied record does not include step-by-step instructions, so the sequence below is a general workflow based on the product's two mounts and its selfie-stick/tripod functions. Use it as a checklist, and stop if anything feels forced.
- Choose your mount first: Decide whether your phone or accessory will attach magnetically or through the 1/4" screw. The 2-in-1 design lets you switch between compatible mounting options, but you need to pick one before positioning the tripod.
- Attach your device before extending: Mount your phone or accessory while the MT-44M is still compact. This makes it easier to check alignment and reduces the chance of knocking the tripod over while you fiddle with the mount.
- Set the tripod legs on a stable surface: When using it as a tripod, open the legs fully and place them on a level surface. The product information does not specify leg angles or weight limits, so keep the setup balanced and avoid leaning heavy accessories far from the center.
- Extend for selfie-stick use only when handheld: If you switch to selfie-stick mode, collapse the tripod legs first and hold the stick securely. The record does not list maximum extension lengths or locking mechanisms, so extend cautiously and check that each section feels secure before raising your phone.
- Test the magnetic hold before you trust it: Give the mounted phone a gentle wiggle. If it shifts easily, reposition it or switch to the 1/4" connection if your accessory supports it. The supplied information does not confirm magnetic strength or compatibility with specific phone models, so your own test is the real checkpoint.
Magnetic mount tips that apply to this tripod
Magnetic mounts are convenient, but they depend on a clean, compatible surface. The MT-44M record confirms a magnetic mount is present, but it does not list required plates, phone compatibility, or holding force. These tips stay within what the product evidence supports.
- Keep the magnetic surface clean: Dust and grit can weaken any magnetic connection. Wipe the mount and your phone or case before attaching, especially outdoors.
- Use the 1/4" screw when you need a mechanical connection: The MT-44M includes a 1/4" connection alongside the magnetic mount. If your accessory has a matching screw thread, that option gives you a physical attachment rather than relying on magnetism alone.
- Avoid stacking unnecessary accessories: The supplied record does not state a load capacity. Adding extra brackets or adapters increases leverage on the mount, so keep the setup as simple as your shot allows.
Where the 1/4" screw changes your options
The 1/4" connection is the quieter hero of the MT-44M. It lets you move beyond phone-only shooting if you have accessories with a standard 1/4" thread, such as certain small lights or camera accessories. The product record does not list which specific accessories are supported, so check the thread on your own gear before assuming a fit.
For vlogging, this matters because you can keep the tripod as a stable base and swap what sits on top. Start with the 1/4" mount if you want a more predictable connection, then use the magnetic mount for quick phone changes when your setup allows it.
What to confirm before you rely on it for a shoot
The MT-44M is a compact, white, two-mount tripod, but the supplied information leaves some practical questions open. It does not confirm maximum height, folded length, weight capacity, magnetic holding strength, or specific phone compatibility. Those are not flaws in the product; they are simply details the record does not settle.
Before a paid shoot or a trip where the tripod is your only support, test your exact phone and case combination at home. Check the magnetic hold, try the 1/4" screw with your accessory, and confirm the legs sit steadily on the surfaces you expect to use. If your setup depends on a specification that is not listed, contact the store or the manufacturer rather than guessing.



