What the FirstFire Jr. Initiator Pack Contains
The AeroTech FirstFire Jr. Initiators (3-pack, item 89895) are the same igniters supplied with all Enerjet E, F, and G composite rocket motors and AeroTech D, E, F, and G rocket motors. Each pack includes three initiators, each with 8-inch leads and a high-temperature pyrogen tip designed for reliable ignition.
Step-by-Step Setup for Reload Motors
Follow these steps to use the FirstFire Jr. Initiator with your composite reload motor.
- 1. Prepare the motor: Assemble your Enerjet or AeroTech reload motor according to the manufacturer's instructions. Ensure the motor is properly seated in the rocket and the nozzle is clear.
- 2. Insert the initiator: Carefully insert the pyrogen tip of the FirstFire Jr. Initiator into the motor nozzle until it contacts the propellant grain. Do not force it; the tip should sit firmly against the propellant.
- 3. Secure the leads: Route the 8-inch leads out of the rocket's launch lug or tube. Use microclips to connect the leads to your launch controller's output wires. The two-lead system makes connection straightforward.
- 4. Final check and launch: Ensure the leads are not touching each other or any metal parts of the rocket. Move to a safe distance and follow your launch system's procedures. The high-temperature pyrogen mixture ignites the motor reliably.
Product Facts
-
AeroTech & Enerjet by Aerotech FirstFire™ Jr. Initiators (3 pack) - 89895: The same great initiator (igniter) as supplied with all Enerjet E, F and G composite rocket motors, and AeroTech D,E,F,and G rocket motors. Confirms compatibility with the most common mid-power composite motors, so you can use this pack as a direct replacement or spare igniters.
AeroTech & Enerjet by Aerotech FirstFire™ Jr. Initiators (3 pack) - 89895
-
AeroTech & Enerjet by Aerotech FirstFire™ Jr. Initiators (3 pack) - 89895: FirstFire igniters provide an easy-to-use two lead system and a high temperature pyrogen mixture to light your motors reliably every time. The two-lead design simplifies connection with standard microclips, and the pyrogen ensures reliable ignition even in cooler weather.
-
AeroTech & Enerjet by Aerotech FirstFire™ Jr. Initiators (3 pack) - 89895: These come with 8 inch long leads to make connections easy with regular microclips. 8-inch leads offer enough length to reach launch controller clips without adding extension wires, reducing potential failure points.
-
AeroTech & Enerjet by Aerotech FirstFire™ Jr. Initiators (3 pack) - 89895: 3 initiators included. Enough for three launches or as backups; ideal for a launch session or for replacing lost/failed initiators.
Compatibility Notes and Limitations
The FirstFire Jr. Initiators are designed for Enerjet E, F, G and AeroTech D, E, F, G composite motors. They are not intended for use with black powder motors or larger high-power motors (H and above) without checking compatibility. The supplied information does not confirm use with motors outside this range, so verify your motor's igniter requirements before launch.
Always follow your local safety code and launch site rules. The initiators are single-use; do not attempt to reuse them.
