What the VARIO VESA Adapter Kit Offers

The VARIO VESA Adapter Kit is designed to help you fine-tune the alignment of your monitors on a sim racing rig. Its patented mechanism lets you adjust height and rotation angles in two planes using an Allen key. This kit is available as a single bracket or a set of three, making it suitable for single or triple monitor setups.

Key Specifications at a Glance

  • VARIO™ VESA Adapter Kit: Vertical adjustment possible of 32 mm This range allows you to raise or lower the monitor to match your eye level, reducing neck strain during long sessions.

    VARIO™ VESA Adapter Kit

    VARIO™ VESA Adapter Kit

  • VARIO™ VESA Adapter Kit: Horizontal adjustment +/- 10 mm Useful for centering the monitor horizontally relative to the stand, especially when aligning triple screens side by side.

  • VARIO™ VESA Adapter Kit: Horizontal rotation +/- 5 deg, Vertical rotation +/- 5 deg These tilt and swivel adjustments help angle the monitor for optimal viewing, whether in a single or triple configuration.

  • VARIO™ VESA Adapter Kit: Compatible with 40mm and 1.5-inch aluminum profile-based triple monitor stands Ensures the adapter fits common sim racing rig profiles, so you can mount it on most aluminum extrusion stands without additional adapters.

  • VARIO™ VESA Adapter Kit: Single (1x) Vario Vesa Adapter with a 100x100 mm/75x75 mm VESA bracket The adapter supports the two most common VESA patterns, making it compatible with a wide range of monitors. The single option is ideal for adding one screen or replacing a lost bracket.

Choosing Between Single and Set of Three

The VARIO VESA Adapter Kit comes in two variants: a single bracket and a set of three. If you are building a triple monitor setup, the set of three ensures uniform adjustment across all screens, which simplifies alignment. For a single monitor rig, or if you need a spare or replacement bracket, the single option is more economical. Both variants use the same 100x100 mm or 75x75 mm VESA pattern and offer identical adjustment ranges.

Compatibility Considerations

Before purchasing, verify that your monitor stand uses 40mm or 1.5-inch aluminum profile. The adapter is specifically designed for such profiles, which are standard in Sim-Lab's triple monitor stands and many other sim racing rigs. Also confirm that your monitor has a VESA mounting pattern of 100x100 mm or 75x75 mm. Most modern monitors support at least one of these patterns, but it is worth checking your monitor's manual or specifications.

Installation Overview

Mounting the VARIO VESA Adapter Kit requires an Allen key (not supplied). Attach the VESA bracket to the back of your monitor using the appropriate screws (typically included with your monitor). Then slide the adapter onto your aluminum profile stand and tighten it. Use the Allen key to adjust height and rotation as needed. The process is straightforward, but take care not to overtighten the bolts, as the aluminum profile can be damaged.