Fitting questions before you buy

Will the VEO BA-185 fit my binoculars?

Only if your binoculars have a 1/4" threaded socket. Check before buying. The adaptor is intended for roof prism binoculars, but some 50mm or larger models may have a smaller space for an adaptor to fit, so inspect the area between the objective lenses first.

Where is the socket on my binoculars?

It sits on the front, between the objective lenses, under a cap. Remove that cap to reveal the 1/4" threaded socket.

Will it fit my tripod's 3/8" thread?

No. The VEO BA-185 will not fit a 3/8" thread, which is often found on larger tripods. It is designed for a 1/4" thread.

Do I need a quick release plate?

Not if your tripod head is Arca compatible. The adaptor's base drops straight into the clamp. On a non-Arca head, you will need a separate quick release plate designed for that head.

The adaptor at a glance

  • VEO BA-185 Arca Compatible Binocular Tripod Adaptor: VEO BA-185 Arca Compatible Binocular Tripod Adaptor, catalog price USD 16.75 (comparison price USD 25.00). A low-cost way to stabilise binoculars on a tripod or monopod without buying an extra Arca plate.

    VEO BA-185 Arca Compatible Binocular Tripod Adaptor

    VEO BA-185 Arca Compatible Binocular Tripod Adaptor

  • VEO BA-185 Arca Compatible Binocular Tripod Adaptor: Mounts binoculars directly to a tripod or monopod, or onto an Arca compatible tripod head without an additional quick release plate. Covers both simple setups and heads that already use the Arca system.

  • VEO BA-185 Arca Compatible Binocular Tripod Adaptor: Requires binoculars with a 1/4" threaded socket; will not fit a 3/8" thread. The two checks that decide whether the adaptor is compatible with your gear.

How to mount binoculars with the VEO BA-185

The sequence changes slightly depending on whether you are going straight onto a tripod or monopod, or onto an Arca compatible head.

  1. Reveal the socket: Take off the cap on the front of the binoculars, between the objective lenses, to expose the 1/4" threaded socket.
  2. Attach the adaptor to the binoculars: Screw the VEO BA-185 into the 1/4" socket and tighten it firmly.
  3. Option A: direct to tripod or monopod: Screw the adaptor onto the 1/4" thread of the tripod or monopod.
  4. Option B: onto an Arca compatible head: Place the base of the adaptor into the clamp of the head and tighten.
  5. Option C: onto a non-Arca head: Attach the adaptor to a quick release plate designed for that head, then use the head as normal. This keeps the easier aiming that a head provides.

Why use an adaptor instead of hand-holding?

The VEO BA-185 is aimed at longer viewing sessions in one position, such as watching from a bird hide or keeping an eye on a garden feeding station. Mounting the binoculars on a tripod or monopod removes the need to hold them steady, and using a tripod head lets you aim them much more easily than a fixed mount.

The Arca-compatible base also means a more solid grip with no risk of the adaptor loosening in use, and no extra spend on a spare quick release plate.

Tripod and head compatibility

Can I use it on a non-Arca tripod head?

Yes, but you will need a separate quick release plate designed for that head. Screw the adaptor onto the plate's 1/4" thread and use the head as normal.

Can I use it on a monopod?

Yes. The adaptor can screw directly onto the 1/4" thread of a monopod, as well as a tripod.

What if my binoculars are 50mm or larger?

The adaptor is intended for roof prism binoculars, but some 50mm or larger models may have a smaller space between the objective lenses for the adaptor to fit. Check that space before buying.

Does the supplied information confirm every binocular model?

No. The supplied information gives the 1/4" socket requirement and the roof prism/50mm note, but not a full model list. If your binoculars are not clearly covered, check the socket and the space between the objective lenses first.