White Solar Nail Polish: Common Questions

How does solar polish work?

Solar polish contains pigments that react to UV light. Indoors, away from direct UV, Sundae is My Favorite Day appears as a white crelly with pink and green shifting shimmer and blue, pink, and yellow glitters. Step into sunlight or another UV source and the base shifts to pink. The color change is a response to UV exposure, not a thermal reaction.

What does Sundae is My Favorite Day look like indoors versus in sunlight?

Indoors, expect a white crelly base with scattered shimmer and glitter, including heart and star shapes. In UV light or sunlight, the white base turns pink, so the same manicure reads as two different looks depending on where you are.

How many coats should I use?

The supplied product information recommends 2 coats. Because this is a crelly with large glitters, you may need to adjust your application technique to get even coverage and glitter distribution rather than simply adding more coats.

How do I get the large glitters out of the bottle?

With large glitter polishes, the brand recommends letting the bottle sit upside down for a minute or so before use. This lets the larger glitters rise higher in the bottle so they disperse more evenly when you apply the polish.

Is this the same as the PPU Exclusive Lactose Intoler..whaat?

The two are described as siblings and are identical except that Sundae is My Favorite Day has a pink solar effect. If you already own the PPU exclusive, expect the same glitter mix and crelly formula with a different UV-activated color shift.

What size is the bottle?

Sundae is My Favorite Day comes in a 15ml bottle. The catalog lists the color as white, which is the indoor base shade before UV exposure.

Product Details That Affect Wear

Getting an Even Finish With a Solar Crelly

Crelly polishes sit between a cream and a jelly, so they can look slightly translucent. With Sundae is My Favorite Day, the white base carries shimmer and glitter, which means application matters as much as the color itself. Start with the bottle upside down for a minute so the larger hearts and stars can rise, then roll the bottle gently rather than shaking it to avoid bubbles.

Apply thin, even coats rather than one thick layer. The recommended 2 coats give you a starting point, but if you see patchiness or want more glitter coverage, add a third thin coat. Let each coat dry enough to avoid dragging the glitter. A glossy top coat will help smooth over the larger glitter pieces and keep the shimmer visible.

Keeping the UV Color Change Visible

The solar effect depends on UV exposure, so the pink shift will be most obvious outdoors on a sunny day. Indoors, under typical artificial lighting, the polish will mostly stay white. If you want to see the change without going outside, a UV lamp or direct sunlight through a window can trigger it, but the intensity will vary.

Top coat choice can influence how strongly the color shift reads. A clear, non-yellowing top coat preserves the white base and lets the pink come through. Avoid tinted top coats that could alter the base color. Also keep in mind that the shimmer and glitter sit within the polish, so the color change happens in the base, not in the glitter itself.

Solar Polish Care: What to Expect

As with any glitter polish, removal takes a little more patience. Use a acetone-based remover and let it sit on the nail for a few seconds before wiping, or use the foil method for the larger glitters. There are no specific care instructions supplied for this polish beyond the application notes, so general gentle removal practices apply.

Store the bottle upright, away from direct sunlight, to keep the formula stable. Because the polish is UV reactive, prolonged sun exposure in the bottle is not necessary for the effect to work on your nails. If the polish thickens over time, a few drops of polish thinner can help restore consistency, though this is a general practice rather than a supplied instruction.