What Tape-On Visors Do for Your RAV4 or MDX
Armordillo tape-on window visors let you crack the windows for fresh air while helping keep rain, wind, and drafts out. They also reduce wind noise and help cut down mirror fogging by improving airflow near the side windows. The design is straightforward: a formed acrylic deflector that mounts to the outside of the door frame using the included premium adhesive strip. No drilling, no hardware — just a clean exterior upgrade.
This guide covers two specific vehicle fits: the 2006-2012 Toyota RAV4 and the 2001-2006 Acura MDX. Both use the same tape-on method, but the visor shape and adhesive placement differ by model. Confirm your vehicle year before starting.
Installation Steps for Tape-On Visors
The process is the same for both the RAV4 and MDX sets. Work in a clean, dry area and avoid installing in direct sunlight or cold weather.
- Clean the door frame surface: Wipe the area where the visor will attach with rubbing alcohol or a mild degreaser. Remove all wax, dirt, and residue. Let the surface dry completely.
- Dry-fit the visor: Hold the visor against the door frame to confirm the curve and length match your vehicle. Do not remove the adhesive backing yet.
- Peel and position: Starting at one end, peel the red liner from the adhesive strip and press the visor firmly onto the clean surface. Work slowly to avoid trapping air bubbles.
- Apply firm pressure: Run your hand along the entire length of the visor, pressing the adhesive into the door frame. Pay extra attention to the ends.
- Let the bond set: Keep the windows closed and avoid washing the vehicle for a period after installation so the adhesive can fully cure.
Product Facts for Your Vehicle
-
ARMORDILLO® 2006-2012 Toyota RAV4 Tape On Window Visors: Designed specifically for the 2006-2012 Toyota RAV4. Tape-on installation with included premium adhesive strip. No drilling required. Confirms this visor set fits your RAV4 exactly and can be installed without modifying the door frame.
ARMORDILLO® 2006-2012 Toyota RAV4 Tape On Window Visors
-
ARMORDILLO® 2001-2006 Acura MDX Tape On Window Visors: Designed specifically for the 2001-2006 Acura MDX. Tape-on installation with included premium adhesive strip. No drilling required. Confirms this visor set fits your MDX exactly and can be installed without modifying the door frame.
ARMORDILLO® 2001-2006 Acura MDX Tape On Window Visors
Care Tips to Keep the Adhesive Strong
Once installed, the visors need minimal upkeep. Hand-wash around the visors with a soft sponge and avoid high-pressure spray directed at the adhesive edge. Over time, dust or wax buildup along the top edge can weaken the bond — a quick wipe with isopropyl alcohol during routine cleaning helps maintain grip.
If you live in a hot climate, the visor material itself is stable, but the adhesive can soften in extreme heat. Parking in the shade or using a sunshade on the windshield reduces direct heat on the door frame. In cold weather, allow the vehicle interior to warm up before operating the windows to avoid putting stress on the visor mount.
What the Supplied Information Doesn't Cover
The product records confirm the visors are designed for the listed years and models but do not specify a maximum temperature range for the adhesive or a recommended cure time. If you need specific climate-related guidance, contact Armordillo support with your vehicle details. Also, the records do not include instructions for removing old visor adhesive — if you're replacing an existing set, plan to use an automotive adhesive remover and clean the surface thoroughly before installing the new visors.

