Start with what the mug is built to handle
The Witcher 3: Wild Hunt 10th Anniversary Mug is a black glossy ceramic mug printed with Eredin, Caranthir, and Imlerith in their skeletal helms. Because the artwork sits on the outside where it gets handled, washed, and stacked, the care routine is mostly about protecting that print while still using the mug normally.
The good news is that the supplied product details confirm two things that make daily use simple: the mug is dishwasher and microwave safe, and the ceramic is lead and BPA-free. That means you do not need a separate hand-wash-only routine just to keep drinking from it.
The specs that shape your routine
-
THE WITCHER 3: WILD HUNT 10TH ANNIVERSARY MUG: Ceramic, 11 oz (325.31 mL) capacity, 3.85′′ × 3.35′′ (9.8 × 8.5 cm) A standard 11 oz ceramic mug fits most dishwashers and cup holders, and the listed dimensions help you judge whether it will sit comfortably under your machine's dispenser or on your shelf.
THE WITCHER 3: WILD HUNT 10TH ANNIVERSARY MUG
THE WITCHER 3: WILD HUNT 10TH ANNIVERSARY MUG
-
THE WITCHER 3: WILD HUNT 10TH ANNIVERSARY MUG: Dishwasher and microwave safe You can reheat coffee and run it through a normal cycle without switching to a special hand-wash-only routine.
-
THE WITCHER 3: WILD HUNT 10TH ANNIVERSARY MUG: Lead and BPA-free material Relevant if you are choosing a mug for everyday hot drinks and want the material confirmed rather than assumed.
A wash routine that keeps the print looking sharp
The mug is dishwasher safe, so the steps below are about getting a clean mug without unnecessary wear on the glossy black finish and the artwork.
- Load it upright and give it space: Place the mug on the top rack with the opening facing down and leave a little room around it so other items do not rub against the printed generals during the cycle.
- Keep sharp or heavy items away from the print: Metal utensils and cast-iron pans knocking against the outside can dull a glossy finish over time. Load them on a separate rack or away from the mug.
- Hand wash when the mug is the only thing to clean: Warm water and a soft sponge are enough for everyday coffee or tea. This is a preference, not a requirement — the mug is listed as dishwasher safe.
- Dry fully before storing: Let the mug air-dry or towel it dry before putting it back on the shelf, especially if you store it upside down in a closed cabinet.
Microwave use: what is confirmed and what is not
The product details list the mug as microwave safe, so reheating a drink is within the stated use. A few practical habits still help.
- Reheat the drink, not an empty mug: The microwave-safe listing covers normal use with liquid in the mug. Avoid running an empty mug for long periods, which offers no benefit and adds unnecessary heat.
- Stir and test before drinking: Microwaved liquids can heat unevenly. Stir, then sip carefully — this is general kitchen practice, not a manufacturer instruction supplied with the mug.
- Do not assume oven or stovetop use: The supplied details confirm microwave and dishwasher safety only. They do not confirm oven, stovetop, or open-flame use, so keep the mug out of those.
- Skip sudden temperature shocks: Moving a very hot mug straight into cold water can stress ceramic. Let it cool a little first — again, sensible handling rather than a supplied instruction.
Removing coffee and tea stains from a black mug
A black glossy interior hides light staining better than a white mug, but coffee oils and tea tannins can still leave a dull film. These steps use ordinary kitchen items and avoid abrasive scrubbing that could scratch the glaze.
- Start with hot water and a soft sponge: Most fresh residue lifts with warm water and a little dish soap. Avoid steel wool and scouring powders on the printed exterior.
- Try a baking-soda paste for stubborn rings: Mix baking soda with a little water, apply to the stained area, leave briefly, then rinse and wash as normal. Keep it off the printed artwork if you can, and rinse thoroughly.
- Use a diluted white-vinegar soak for tannin film: Fill the mug with a mix of white vinegar and water, let it sit, then wash and rinse. This is a common household method, not a supplied manufacturer instruction.
- Rinse and dry before your next cup: Residual cleaner can affect taste. Rinse well and dry the mug before use.
Storage that protects the artwork
- Stack sparingly: If you stack mugs, put a soft cloth or paper towel between the base of one and the print of the one below to reduce rubbing.
- Keep the printed side from hard contact: The artwork of Eredin, Caranthir, and Imlerith covers the outside of the mug. In a crowded cabinet, turn the printed side toward the back or a soft surface.
- Store dry: A fully dry mug avoids musty smells and keeps the interior ready for your next coffee.
- Expect slight color variation: The product details note that colors may vary slightly from images due to screen display differences. That is normal for a printed ceramic item, not a care issue.
Plan for the made-to-order timeline
This mug is made to order, and the product details ask you to allow up to an extra 5–7 business days for it to ship. Because each item is produced specifically for your order, cancellations and returns cannot be accepted. If you are buying it as a gift or want it for a specific date, order with that extra window in mind rather than assuming it ships like an in-stock item.
Once it arrives, the care routine above is simple: dishwasher and microwave use are confirmed, the ceramic is lead and BPA-free, and the main job is keeping the glossy print free of abrasive contact. Treat the artwork kindly and the mug will handle daily coffee duty without fuss.


