Start With the 3-Layer Structure

The YEDC 3rd Anniversary Pig Nose Magnet Slider is not a single-piece fidget. It uses a 3-layer magnetic structure, with a stainless steel main body and brass and copper inlays on the surface. That layered build is what gives the slider its Q-bounce feel and a more pronounced shock in the hand, but it also means your care routine should respect the seams between layers and the softer inlay metals.

Before you clean or handle the slider, know which configuration you are holding. The middle layer can be removed to turn the 3rd Anniversary Pig Nose into a 2-layer slider, and that same middle layer is designed to upgrade earlier Pig Nose sliders from a 2-layer to a 3-layer magnet setup. Treat the middle layer as a separate component during any cleaning, and keep track of its orientation so it goes back the same way.

What the Catalog Confirms

  • YEDC 3rd anniversary Pig Nose Magnet Slider: 3-layer magnetic structure with a stainless steel main body and brass and copper surface inlays. The mixed metals and layered magnets are the two areas that need the most careful handling during cleaning and storage.

    YEDC 3rd anniversary Pig Nose Magnet Slider

    YEDC 3rd anniversary Pig Nose Magnet Slider

  • YEDC 3rd anniversary Pig Nose Magnet Slider: Dimensions: 45 * 25 * 18mm; weight: 95g. Knowing the size and weight helps you choose a storage pouch or tray that fits without pressing on the slider's layers.

  • YEDC 3rd anniversary Pig Nose Magnet Slider: The middle layer can be removed to convert the 3rd Anniversary Pig Nose into a 2-layer slider, and it can upgrade earlier metal, Corian, and carbon quartz Pig Nose sliders from 2-layer to 3-layer magnet setups. If you own older Pig Nose sliders, this middle layer is a shared part, so your care routine should cover both the anniversary slider and any slider you upgrade.

A Simple Cleaning Routine for the Pig Nose

The supplied product information does not include a manufacturer cleaning procedure, so the steps below are general handling advice built around the confirmed materials and structure. They are not instructions from YEDC. When in doubt, do less.

  1. Separate the middle layer first: Because the 3rd Anniversary Pig Nose can be converted to a 2-layer slider, remove the middle layer before cleaning so you can reach the inner faces. Keep the magnets away from loose steel tools or other magnet sliders while it is apart.
  2. Wipe the stainless steel body with a dry or barely damp cloth: The main body is stainless steel, which is the most forgiving part of the build. Avoid soaking the slider or letting water sit in the gaps between layers.
  3. Treat brass and copper inlays gently: The surface inlays are brass and copper. Use a soft cloth and avoid abrasive polishes unless you have confirmed they are suitable for those metals, since the catalog does not specify a finish or coating.
  4. Clean the patch side separately: The patch on one side is held by magnets. Remove it before wiping the body so you do not trap moisture or grit between the patch and the slider.
  5. Let everything dry fully before reassembly: Reassemble only when the layers and patch are completely dry. Moisture left between the layers is the easiest way to create a problem you did not have before.

Patch Swaps and Magnet Care

The patch on one side attaches through magnets, and YEDC states that more patch designs will be released in the future for replacement. That makes patch swapping a normal part of ownership rather than a one-time setup. When you change patches, pull them straight off rather than sliding them, and check that no small metal debris has stuck to the magnet faces before you press a new patch on.

Magnet care for this slider is mostly about keeping the magnet faces clean and avoiding knocks that could crack or chip the surrounding material. The catalog does not confirm a specific magnet grade, coating, or replacement procedure, so if a magnet feels weak or a layer sits unevenly, contact the store rather than attempting a repair that is not documented.

Storage and Handling Habits That Suit This Slider

  • Store it apart from other magnet sliders: The 3rd Anniversary Pig Nose uses strong magnets in a 3-layer stack. Keeping it away from other magnetic fidgets and steel tools reduces the chance of unintended attraction or scratches.
  • Use a soft pouch or lined tray: At 95g and 45 * 25 * 18mm, the slider is small but dense. A padded pouch keeps the brass and copper inlays from rubbing against harder items in a pocket or bag.
  • Keep it dry: The catalog does not describe the slider as water-resistant. Avoid leaving it in damp pockets or near sinks, especially with the patch removed.
  • Check the middle layer after play: Because the middle layer is removable, give it a quick visual check after a session to make sure it is seated correctly and that no debris has collected between the layers.

What the Listing Does Not Confirm

The supplied information does not include a manufacturer cleaning solution, lubrication recommendation, or magnet replacement guide for the 3rd Anniversary Pig Nose. It also does not confirm a specific finish or coating on the brass and copper inlays. That means any polishing or oil you use is your own choice, and it is worth testing on a small, hidden area first.

If you are upgrading an older Pig Nose slider with the middle layer, the catalog confirms compatibility with the metal Pig Nose, Corian Pig Nose, and carbon quartz Pig Nose, but it does not list step-by-step upgrade instructions. Follow the patch assembly tutorial supplied by the store where available, and stop if a layer does not seat without force.

Ordering and Delivery Facts to Plan Around

  • YEDC 3rd anniversary Pig Nose Magnet Slider: This item ships from China; tracking is typically available within 2–4 business days, and delivery is approximately 8–14 business days after tracking is provided. Plan your first cleaning and patch swap for after the slider arrives, and keep the packaging until you have confirmed everything is present.
  • YEDC 3rd anniversary Pig Nose Magnet Slider: The store does not ship to P.O. boxes, Alaska, or Hawaii. Check your delivery address before ordering so your care routine is not delayed by a shipping issue.