What the Zahar 60-inch fan gives you out of the box

The Zahar 60-inch modern industrial ceiling fan combines a bold matte black and gold design with an integrated dimmable LED light and a full-function remote control. Before you install or use it, it helps to know what is actually included and what the fan can and cannot do.

This fan is designed for indoor dry-rated spaces such as living rooms, master bedrooms, game rooms, and kitchens. It uses a whisper-quiet DC reversible motor with 10 speeds, and the LED light kit delivers 1300 lumens with three color temperature settings (2700K to 4000K). The remote controls fan speed, light dimming, and direction. There is no smart or app functionality.

Zahar 60-inch fan facts that affect your setup

Setting up the Zahar fan: installation and remote pairing

The supplied evidence describes the Zahar as designed for easy installation, suitable for first-timers. The following steps are based on the fan's included components and general ceiling fan practice. Always follow the manufacturer's manual for your specific ceiling height and wiring.

  1. Check your ceiling and room: The fan is recommended for ceilings 8 feet or higher. Use the included 5-inch down rod for standard 8-foot ceilings or the 10-inch rod for higher ceilings. For sloped ceilings up to 15 degrees, the angled mount is provided.
  2. Install the mounting bracket and motor: Secure the bracket to a ceiling joist or support box. Attach the down rod to the motor housing, then hang the motor on the bracket. Wire the fan to your household supply (120V). The fan does not require a wall switch.
  3. Attach the blades and LED light kit: The five matte black ABS blades are lightweight and durable. The LED light kit is integrated and connects directly to the motor. No separate bulb installation is needed.
  4. Pair and test the remote: Insert the two AAA batteries into the remote. The remote should control the fan immediately. Use it to adjust the 10 speeds, toggle the light on/off, dim the light, and change fan direction for summer or winter mode.

Using the LED light and remote day-to-day

The remote is your only control point. You can dim the light across a warm-to-cool range (2700K to 4000K) and set the fan to one of 10 speeds. The reverse function is also controlled via remote, letting you switch from summer downdraft to winter updraft.

Because the LED light is integrated and rated for 50,000+ hours, you will not need to replace bulbs often. If the light fails within the 3-year limited warranty, contact the manufacturer. The fan itself is rated for 5400 CFM airflow at maximum speed and runs at a maximum noise of 58 dB(A).

What the Zahar does not include

The Zahar is not a smart fan. It has no Wi-Fi, app control, or voice assistant compatibility. The remote is the only way to operate it. It is also not rated for outdoor or damp locations. If you need a smart fan or outdoor rating, this model is not the right choice.

The fan ships in a single color variant (Black Gold) and the down rod diameter is not user-selectable. The supplied evidence does not confirm a specific down rod diameter beyond the included 5-inch and 10-inch rods.