Why Your Turntable Needs a Phono Stage
A turntable cartridge produces a very weak electrical signal — typically a few millivolts for moving magnet designs and even less for moving coil. That signal also lacks the standard equalization curve (RIAA) that your amplifier expects. A phono preamplifier like the MOON 110LP v2 serves two essential jobs: it applies RIAA equalization and boosts the signal to line level so your integrated amplifier, preamp, or receiver can handle it. Without a phono stage, your turntable will sound quiet, thin, or completely silent.
What the 110LP v2 Does for Your System
The MOON 110LP v2 is a standalone phono preamplifier designed to sit between your turntable and your amplifier. It accepts the delicate signal from a moving magnet or moving coil cartridge, applies the correct RIAA curve, and outputs a standard line-level signal. This means you can connect almost any turntable to an amplifier or receiver that lacks a built-in phono input. The unit is available in a single Standard configuration, making the decision straightforward — you don't need to choose between multiple versions.
110LP v2 Phono Preamplifier Facts
-
110LP v2 唱机前置放大器: The 110LP v2 is a phono preamplifier from MOON - Simaudio, listed in the Phono Preamplifiers category. It is offered in a single Standard configuration (SKU-7e713c91c00d). There is no variant selection to worry about — the 110LP v2 comes as one model, simplifying your purchase decision.
110LP v2 唱机前置放大器
Cartridge Compatibility: Moving Magnet and Moving Coil
The 110LP v2 supports both moving magnet (MM) and moving coil (MC) cartridges. Moving magnet cartridges produce a higher output voltage and are common on entry-to-mid-level turntables. Moving coil cartridges deliver lower output but often offer finer detail retrieval, and they require higher gain. The 110LP v2 handles both types, so you can upgrade your cartridge later without replacing the phono stage. The supplied catalog information does not specify whether the unit offers switchable gain or loading settings — check the manual or contact MOON if you need those details for a specific MC cartridge.
Setup Considerations for the 110LP v2
Place the 110LP v2 close to your turntable to keep the phono cable runs short — long cables at phono level can pick up noise. Connect the turntable's RCA cables to the 110LP v2's input, then run standard interconnects from its output to a line-level input on your amplifier or receiver. The unit requires AC power; the supplied catalog does not specify the exact power supply voltage or connector type, so verify those details from the product packaging or manual before installation. Because the 110LP v2 is a single-purpose device, it does not add extra switching or digital inputs — it simply does one job well.
What the Catalog Does Not Confirm
The supplied information does not list the 110LP v2's gain settings, loading options, or whether it supports balanced (XLR) output. These are common points of interest when matching a phono stage to a specific cartridge. If you need precise gain or impedance matching — especially for low-output moving coil cartridges — consult the full product documentation or MOON support. The absence of these details in the catalog does not mean the unit lacks them; it simply means they are not confirmed in the data available here.
Is the 110LP v2 Right for Your Vinyl Setup?
If your amplifier or receiver lacks a phono input, or if you want a dedicated phono stage that can handle both MM and MC cartridges, the MOON 110LP v2 is a solid choice. Its single-configuration design removes guesswork, and its role is clear: boost and equalize your turntable's signal so your main system can play it properly. The 110LP v2 is not a feature-packed preamp with digital inputs or streaming — it is a focused phono stage for those who prioritize vinyl playback quality.
