Quick answer
Install the 18" PMR Kit only on an 18" phase shifting beam expander, and follow a careful sequence of compatibility checks, mounting, alignment, and power connection to avoid damage and ensure accurate phase modulation.
Why compatibility matters
The 18" PMR Kit is designed exclusively for use with an 18" phase shifting beam expander. Attempting to install it on any other expander size or model can lead to mechanical mismatch and compromised phase modulation accuracy.
Before starting, verify that your system includes the 18" phase shifting beam expander and that the kit's mounting interfaces match. If you are unsure about compatibility, consult the system documentation or contact ZYGO support.
What's in the kit
The 18" PMR Kit includes the phase modulating receptacle and a CAN power supply. The CAN power supply is essential for driving the phase modulation mechanism; do not substitute it with a generic power source.
Check the kit contents upon delivery to ensure all components are present and undamaged. If any part is missing or damaged, contact ZYGO before proceeding.
Installation steps
- Verify compatibility: Confirm that your system uses the 18" phase shifting beam expander. Check the model number and mounting interface to ensure the PMR kit matches. Do not proceed if there is any mismatch.
- Prepare the work area: Clean the optical surfaces and ensure the mounting area is free of dust and debris. Have the necessary tools ready, such as hex wrenches and torque wrench. Use lint-free wipes and approved cleaning solutions.
- Mount the PMR: Align the PMR with the beam expander's mounting flange and gently seat it. Secure it with the provided fasteners, tightening evenly in a cross pattern to avoid stress. Avoid overtightening; use the specified torque if provided.
- Connect the CAN power supply: Plug the CAN power supply cable into the PMR's power input. Ensure the connection is secure and that the cable is routed safely away from moving parts. Do not power on until all connections are verified.
- Power on and test: Turn on the power supply and check for any error indicators. Perform a basic phase modulation test to confirm the PMR is functioning correctly. If the test fails, recheck connections and alignment.
Product details
-
18" PMR Kit (Phase Modulating Recepticle) with power supply: The 18" PMR Kit includes a CAN power supply and is intended for use with an 18" phase shifting beam expander only. This ensures you have the correct power source and that the kit will only function properly with the matching expander, preventing installation errors.
18" PMR Kit (Phase Modulating Recepticle) with power supply
