What to Expect from a 2-Tier Hutch Setup

Setting up a 2-tier rabbit hutch is straightforward when you know what each part does. The Classic Grey and Classic Natural models share the same double-decker design: the bottom run area equals the top, giving your rabbit equal space on both levels. Both hutches include a wooden back and two wire sides, which provide better ventilation and visibility than cheap plywood alternatives. Before you start, clear a level spot in a sheltered area — these hutches are built for outdoor use and come with plastic feet to keep the wood off damp ground.

Step-by-Step Assembly

These steps assume you have the hutch box open and the parts laid out. Work on a flat surface and have a screwdriver ready.

  1. Attach the plastic feet: The plastic feet are included to prevent rot by lifting the hutch off wet ground. Screw them securely to the base of the hutch frame before adding any other parts.
  2. Assemble the main body: Join the wooden back panel to the two wire sides. The back panel gives the hutch stability, while the wire sides allow airflow and let your rabbit see out. Use the supplied screws and check that all corners are square.
  3. Insert the removable floor trays: Each hutch comes with two metal-lined removal trays — one for the top section and one for the bottom. Slide each tray into its level before adding the upper tier. The metal lining makes cleaning much easier than plain wood trays.
  4. Stack the upper tier: Position the upper tier on top of the lower section. The double-decker design means the bottom run area is the same size as the top, so your rabbit has room to move between levels. Secure the tier with the provided brackets.
  5. Fit the roof and doors: Attach the roof panel and check that all doors open and close smoothly. The wire sides mean the doors are also wire, so make sure the latches engage properly.

What Each Hutch Offers for Setup

  • Classic Grey 2 Tier Rabbit Hutch: The Classic Grey is a double decker hutch with plastic feet to avoid rot. It has a metal-lined tray for easy cleaning on both levels. The plastic feet let you place the hutch directly on grass or patio without worrying about moisture damage. The metal-lined trays mean you can slide them out for quick cleaning without dismantling the hutch.

    Classic Grey 2 Tier Rabbit Hutch

    Classic Grey 2 Tier Rabbit Hutch

  • Classic Natural 2 Tier Rabbit Hutch: The 3ft Classic Natural 2 Tier Rabbit Hutch is a double decker hutch with a wooden back and 2 wire sides. It comes with 2 removal floor trays. The 3ft width makes this a good fit for smaller gardens or balconies. The wooden back helps insulate the hutch, while the wire sides keep it airy — a balanced mix for temperate UK weather.

    Classic Natural 2 Tier Rabbit Hutch

    Classic Natural 2 Tier Rabbit Hutch

Positioning Your Hutch for Daily Use

Once assembled, place the hutch on a level surface — grass, patio slabs, or gravel all work as long as the plastic feet keep the wood clear of standing water. Face the wire sides away from prevailing wind and rain to keep the inside dry. The removable trays make daily spot-cleaning simple: just slide out the top tray, empty it, and replace it. For a deeper clean, remove both trays and hose them down. Because the bottom run area matches the top, your rabbit can use both levels freely, so check that ramps (if included) are securely fitted and not wobbling.