Quick answer
The A Baoa Qu Zeong Zhanshenhao kit offers a detailed 1/100 scale build with good part fit, though some seam lines and tight joints require careful sanding and dry-fitting.
What to expect from this third-party kit
Third-party kits often vary in plastic quality and mold precision. The A Baoa Qu Zeong Zhanshenhao kit is no exception—it uses a harder ABS-like plastic that holds detail well but can stress-mark if you force parts together without cleaning nubs.
The design captures the iconic Zeong silhouette with panel lines that reward a careful paint job. However, some polycaps are tighter than Bandai standards, so test fit every major joint before applying glue or paint.
Assembly steps and common pitfalls
- 1. Clean and test-fit all parts: Remove each part from the runner with a sharp nipper, then sand nubs flush with 400-grit sandpaper. Dry-fit each subassembly before gluing—many joints are tight and may need slight widening with a round file. Skipping dry-fit can lead to stress marks or parts that don't align properly.
- 2. Address seam lines early: The kit has visible seam lines on the arms and leg binders. Apply thin cement, clamp with rubber bands, and let cure for 30 minutes. Sand the area with 600-grit and then 1000-grit for a smooth finish. Rushing seam removal often leaves ghost lines—patience with sanding grades makes them invisible.
- 3. Widen polycap holes for smooth articulation: Many polycap connections are extremely tight. Use a 3mm drill bit or hobby reamer to open holes by 0.5mm increments until the joint moves freely without wobble. Over-reaming makes joints loose; go slowly and test after each pass.
Product facts
-
A Baoa Qu Model 1/100 Scale Zeong Zhanshenhao Model Kit: This 1/100 scale model kit from A Baoa Qu Model features the iconic Zeong, also known as Zhanshenhao. Designed for hobbyists seeking a detailed build, this kit offers a rewarding assembly experience. The kit's scale and detail make it a centerpiece for your collection, but the harder plastic means you should sand seams thoroughly to avoid visible mold lines.
A Baoa Qu Model 1/100 Scale Zeong Zhanshenhao Model Kit
