Quick Answer

AK11024 Ash Grey is a versatile acrylic paint from AK Interactive's basic line, ideal for base coating, preshading, and weathering on model kits. Use it straight from the bottle for brush work or thin it 1:1 with water or thinner for airbrushing.

Why Ash Grey Works for Model Kits

Ash grey is a neutral, slightly warm grey that works well as a base coat for military vehicles, sci-fi mecha, and aircraft. It provides a solid foundation for weathering powders, washes, and filters without overpowering the final color scheme.

AK11024 is part of AK Interactive's basic line, marked by an orange dot, which means it's formulated for modelers of all skill levels. The 17ml bottle is enough for several small to medium kits.

Brush Painting vs. Airbrushing

Brush painting: AK11024 has good opacity and levels well with a damp brush. Apply two thin coats for even coverage. Let each coat dry fully before the next.

Airbrushing: Thin the paint 1:1 with AK Interactive's own thinner or distilled water. Spray at 15-20 psi. Clean the airbrush immediately after use to prevent clogging.

Step-by-Step Guide to Using AK11024 Ash Grey

  1. Prepare the Surface: Clean the model parts with warm soapy water or isopropyl alcohol to remove mold release agents. Let dry completely. Common mistake: Skipping cleaning leads to poor paint adhesion and peeling.
  2. Shake the Bottle Thoroughly: Shake the AK11024 bottle for at least 30 seconds until the pigment is fully mixed. If the paint has separated, use a mixing ball or stir stick. Common mistake: Not shaking enough causes uneven color and clogging in the airbrush.
  3. Apply the First Coat: For brush painting: Dip a damp brush, wipe off excess, and apply a thin even coat. For airbrushing: Thin 1:1 with thinner or water, spray at 15-20 psi in light passes. Common mistake: Applying too thick a coat results in brush strokes or orange peel texture.
  4. Let Dry and Apply Second Coat: Wait 15-30 minutes for the first coat to dry to the touch. Apply a second thin coat for full opacity. Ash grey may need a third coat on dark plastic. Common mistake: Rushing the drying time leads to lifting or smudging when applying the next layer.
  5. Seal and Weather: Once the paint is fully cured (24 hours), apply a gloss or matte clear coat to protect it. Ash grey is an excellent base for panel liners, washes, and dry brushing. Common mistake: Applying weathering directly on raw paint can stain or reactivate the acrylic.

Product Details

  • AK11024 Ash Grey: The basic label with an orange dot indicates a range designed for any kind of modeler. Comes in 17ml bottles. The orange dot tells you this paint is easy to use and forgiving, making it a good choice if you're new to acrylics or need a reliable workhorse color.

    AK11024 Ash Grey

    AK11024 Ash Grey