Quick answer
Clean your gold titanium clipper blade after every use with a soft brush and blade wash, then dry and oil it to prevent rust and maintain sharpness.
Why gold titanium blades need special care
Gold titanium blades are coated for extra hardness and sharpness, which makes them ideal for sensitive skin but also means the coating can wear off if cleaned with harsh chemicals or abrasive tools. Stick to mild cleaners and soft brushes to preserve the coating.
The fixed faper blade design is thinner than a standard taper blade, so debris can build up in the ridges more easily. Regular cleaning keeps those ridges working for versatile cutting.
Common mistakes that shorten blade life
Using metal brushes or steel wool can scratch the gold titanium coating, leading to rust and dullness. Always use a soft nylon brush or a toothbrush.
Skipping the drying step before oiling traps moisture under the oil, which causes rust. Always dry the blade completely with a lint-free cloth.
Over-oiling can attract hair and dust, gumming up the blade. A few drops on the moving parts is enough.
How to clean and maintain your gold titanium clipper blade
- 1. Remove the blade from the clipper: Unplug the clipper and remove the blade according to the manufacturer's instructions. Place the blade on a clean, flat surface. Work on a towel to catch small screws.
- 2. Brush away loose hair and debris: Use a soft nylon brush or a clean toothbrush to gently sweep hair and dust from between the teeth and around the blade ridges. Do not use metal brushes. Brush in one direction to avoid pushing debris deeper.
- 3. Apply a blade cleaning solution: Spray a clipper blade disinfectant or isopropyl alcohol onto the blade. Let it sit for 30 seconds to loosen dried oil and residue. Avoid soaking the blade; too much liquid can seep into the clipper motor.
- 4. Scrub gently with the brush: Use the soft brush to work the cleaning solution into the blade teeth and ridges. Focus on areas where hair and oil build up. Do not use abrasive pads or scouring powders.
- 5. Wipe the blade dry: Use a lint-free cloth or paper towel to wipe the blade completely dry. Make sure no moisture remains between the fixed and moving blades. Moisture left behind can cause rust, even on coated blades.
- 6. Oil the blade: Apply 1-2 drops of clipper oil to the base of the moving blade and along the cutting edge. Spread it by running the blade for a few seconds (if still attached) or moving it manually. Use only blade-specific oil; household oils can gum up the mechanism.
- 7. Store the blade properly: Reattach the blade to the clipper or store it in a dry case. Keep it away from humidity and direct sunlight. Store blades with the teeth facing down to prevent oil from pooling.
Product facts
-
Gold Titanium Faper Clipper Blade & Slim Deep Tooth Cutter: High hardness premium gold titanium blade with superior sharpness, ideal for sensitive skin. The coating resists corrosion, but you still need to clean and oil it regularly to keep the blade gliding smoothly and avoid irritation.
Gold Titanium Faper Clipper Blade & Slim Deep Tooth Cutter
