Quick answer

Corepad Grips fit all Zowie EC3 series mice (EC3-B, EC3-B V2, EC3-C, EC3-CW, EC3-DW). Clean the shell, align the grip, and press firmly. Replace every 3-5 months to avoid adhesive residue.

Why Corepad Grips for Zowie EC3?

The Zowie EC3 series has a smooth, glossy shell that can get slippery during intense gaming sessions. Corepad Grips provide a textured, non-slip surface that improves control and comfort. They are pre-cut to match the EC3's shape, so no trimming is needed.

These grips are designed for a snug fit on the EC3-B, EC3-B V2, EC3-C, EC3-CW, and EC3-DW. The adhesive is strong enough to stay put but removable with care. Replacing them every 3-5 months prevents the adhesive from bonding too firmly.

What You'll Need

A set of Corepad Grips for Zowie EC3 series, isopropyl alcohol (70% or higher), a lint-free cloth or cotton pad, and a clean, dry workspace. Optional: a plastic spudger or guitar pick to lift old grips without scratching the shell.

Step-by-step installation guide

  1. Clean the mouse shell: Wipe the entire Zowie EC3 shell with isopropyl alcohol and a lint-free cloth. Remove all oils, dust, and old adhesive residue. Let it dry completely. Skipping this step can cause the grip to peel off within days.
  2. Peel and align the grip: Carefully peel the Corepad Grip from its backing. Align it with the left or right side of the mouse (depending on your handedness). The pre-cut shape should match the EC3's contour exactly. Do not touch the adhesive surface with your fingers – oils reduce stickiness.
  3. Press and smooth: Starting from the center, press the grip firmly against the shell. Use your thumb to smooth outward, eliminating air bubbles. Apply even pressure for about 30 seconds. If you see an air bubble, lift the edge nearest the bubble and re-smooth – do not puncture the grip.
  4. Wait before use: Let the adhesive cure for at least 30 minutes before using the mouse. For best results, wait 2-3 hours. Avoid heavy gaming or sweaty hands during this period. Using the mouse immediately can shift the grip and reduce adhesion.
  5. Replace every 3-5 months: When the grip shows wear or becomes less tacky, remove it by gently peeling from an edge. Use isopropyl alcohol to clean any leftover adhesive before applying a new set. Waiting longer than 5 months makes removal harder and may leave sticky residue.

Product facts

  • Corepad Grips - Zowie EC3 Series (EC3-B/EC3-B V2/EC3-C/EC3-CW/EC3-DW): It is recommended to replace the grips every 3-5 months to avoid any potential issues with the removal of the adhesive from your mouse. Regular replacement prevents stubborn adhesive residue that can damage the mouse shell, so set a reminder to swap them out.

    Corepad Grips - Zowie EC3 Series (EC3-B/EC3-B V2/EC3-C/EC3-CW/EC3-DW)

    Corepad Grips - Zowie EC3 Series (EC3-B/EC3-B V2/EC3-C/EC3-CW/EC3-DW)