Quick answer

Dust your Female V PVC statue every two to four weeks with a soft makeup brush, wash it only when the surface feels tacky or visibly grimy using lukewarm water and a drop of mild dish soap, then air-dry completely before returning it to the base. Keep it out of direct sun and away from heat, and never use alcohol, acetone, or abrasive cloths on the paint.

Why PVC statues need a different routine than resin

PVC is a softer plastic than resin or polystone, so it flexes slightly and its painted surface can be more sensitive to solvents and heat. That is why the same cleaning products you might use on a resin bust can cloud the finish or soften the details on a PVC figure. The Female V statue's Samurai jacket, Kang Tao G-58 Dian smart submachine gun, and base details are all painted PVC, so treat every surface as a painted layer rather than bare plastic.

Set up a safe cleaning station before you touch the statue

Work on a clean, soft towel in a room with good light, and keep small parts like the base or any removable weapon within reach but not on the edge of a table. If your statue has been displayed for months, take a phone photo of the base and pose first so you can reassemble it exactly. Avoid cleaning over a sink or hard floor where a dropped piece can chip or disappear.

Match your tools to the job, not to the strongest cleaner

A soft makeup brush, a microfiber cloth, and a bowl of lukewarm water with a single drop of mild dish soap cover almost every situation. Skip paper towels, which can leave lint and micro-scratches, and skip alcohol wipes, which can strip the clear or matte topcoat on painted PVC. For the Female V statue, a dry brush reaches the jacket folds and the smart submachine gun without forcing water into tight joints.

Step-by-step Female V statue care routine

  1. 1. Remove loose dust with a dry soft brush: Use a clean makeup brush or soft paintbrush and work from the top of the head down, letting dust fall away instead of pushing it into the jacket folds or around the smart submachine gun. Checkpoint: if the brush leaves streaks, it is too stiff — switch to a softer one.
  2. 2. Spot-clean only where the surface feels tacky: Dip a microfiber cloth in lukewarm water with one drop of mild dish soap, wring it out until barely damp, and wipe gently. Rinse the cloth with plain water and wipe again to remove soap residue. Common mistake: soaking the statue or letting water sit in the base seam, which can weaken the paint edge.
  3. 3. Air-dry completely before reassembly: Place the statue on a dry towel in a shaded spot and let it dry for at least an hour. Do not use a hair dryer, even on cool, because moving air can push water into joints and heat can soften PVC. Checkpoint: if any part still feels cool or damp, wait longer before putting it back on the base.
  4. 4. Return it to a stable, shaded display spot: Set the Female V statue on a shelf away from direct sun, radiators, and windows, and keep it out of reach of pets or anything that can bump the base. If you use a display case, leave a small gap for air. Common mistake: displaying PVC in a hot car or attic, which can warp thin parts like the weapon barrel.
  5. 5. Repeat dusting every two to four weeks: A quick dry-brush pass is enough most of the time, so you rarely need the damp-cloth step. If you live in a dusty or humid area, check the base and jacket folds more often. Next step: if you also own the Judy Alvarez or David figures, dust them in the same session so no piece gets missed.

Product facts that affect cleaning

  • CYBERPUNK 2077: FEMALE V PVC STATUE: The Female V PVC statue depicts V wearing the iconic Samurai jacket and wielding a Kang Tao G-58 Dian smart submachine gun. The jacket has deep folds and the weapon has thin details, so use a dry soft brush there first and only spot-clean with a barely damp cloth to avoid pushing water into crevices.
  • CYBERPUNK 2077 JUDY ALVAREZ PVC STATUE: The Judy Alvarez PVC statue is made in collaboration with CD PROJEKT RED by Dark Horse and its base displays the Samurai band emblem. If you display Judy next to Female V, clean both with the same mild method so the shared Samurai emblem bases age at the same rate and neither looks duller than the other.
  • CYBERPUNK: EDGERUNNERS DAVID FIGURE: The Cyberpunk: Edgerunners David figure stands 9 inches tall and captures David just after firing his Projectile Launch System, wearing immunosuppressant vials. Taller figures like David collect dust on the upper body and arm cannon first, so if you keep him near your Female V statue, dust him top-down before the dust settles onto the shorter PVC pieces.