Quick answer
DJI Osmo Mobile 4 drift usually comes from an unlevel surface during startup or a need for IMU calibration. You can fix it in the DJI Mimo app without any tools.
Why drift happens
The Osmo Mobile 4 relies on its internal IMU (inertial measurement unit) to stay level. If you turn it on while the gimbal is tilted or moving, the IMU can misread its zero point, causing a persistent drift. Other common causes include a slightly unbalanced phone (especially with off-center cases) or magnetic interference from nearby metal objects.
When to consider hardware issues
If calibration doesn't fix the drift after two attempts, the gimbal may have a physical imbalance or a loose motor. At that point, it's best to contact DJI support or your retailer rather than forcing the motors, which could cause damage.
Diagnosis and fix
- Symptom: The gimbal slowly tilts left/right or the horizon is not level, even when you hold the handle straight.
- Likely cause: The gimbal was powered on while not on a level surface, or the phone is slightly off-center in the clamp.
- Corrective action: Place the gimbal on a flat, stable surface. Open the DJI Mimo app, go to Settings > Gimbal Calibration, and tap 'Start'. Keep the gimbal still until the process finishes (about 30 seconds). If drift persists after calibration, re-center your phone in the clamp and try again.
- When to stop or choose another option: If two calibrations don't resolve the drift, the issue may be hardware-related. Contact DJI support or your retailer instead of attempting further DIY fixes.
Product facts
-
DJI Osmo Mobile 4: The DJI Osmo Mobile 4 uses a magnetic phone clamp and magnetic ring holder for quick attachment. A weak or misaligned magnetic mount can cause slight phone movement, which the gimbal tries to correct, leading to drift.
DJI Osmo Mobile 4
