Quick answer
Tighten loose joints on your Gun EZ RE/100 by applying a thin layer of super glue or nail polish to the peg, letting it dry, then reassembling. This adds friction without permanent damage.
Why joints loosen on RE/100 kits
RE/100 kits like the Gun EZ use polycaps for limb connections. These can wear down over repeated poses or from factory tolerances. The kit's large arms and heavy backpack add stress, making loose shoulder or hip joints more noticeable.
When to avoid thickening methods
Thickening the peg works for most joints, but avoid it on ball joints that need to rotate freely, like the wrist or ankle. For those, consider tightening the socket instead by adding a small piece of tape inside.
Diagnosis and fix steps
- Symptom: The joint flops or droops under its own weight, or the arm/leg falls off when you move the kit.
- Likely cause: The polycap peg is slightly undersized or the socket has worn smooth from repeated posing.
- Corrective action: Apply a thin coat of clear nail polish or super glue to the peg. Let it dry completely (10–15 minutes) before reassembling. Test the fit; repeat if still loose. If the joint is still loose after two coats, stop and try a different method like adding a layer of masking tape inside the socket instead.
- Stop or choose another option: If the peg breaks or the joint cracks, do not force it. Order a replacement polycap or use a small amount of blue-tack as a temporary fix.
Product facts
-
Gun EZ RE/100: The Gun EZ RE/100 is a Standard edition model kit from Thegundamgalaxy in the Other Products category. Its RE/100 scale means larger, heavier parts that put more stress on polycap joints, making loose joints a common issue to address.
Gun EZ RE/100
