Quick answer
The Foonf Rear-Facing Wedge adjusts the seat's recline angle for a safer, more comfortable ride when installed rear-facing. It slides into a dedicated slot on the seat base and is secured with a simple latch. Proper installation is key to avoiding an overly upright or reclined position.
Why the Rear-Facing Wedge Matters
The Foonf Rear-Facing Wedge is a replacement part that allows you to fine-tune the seat's recline angle when your child is rear-facing. Without it, the seat may sit too upright for younger infants or too reclined for older toddlers. Using the wedge ensures the seat is level with the vehicle seat, which is critical for both comfort and crash performance.
Before You Start
Make sure the Foonf is already installed rear-facing in your vehicle using the vehicle seat belt or lower anchors. The wedge is designed to be added after the seat is secure. You'll need access to the base of the seat, so it helps to have the seat slightly loose or to work from the front of the vehicle.
Step-by-step installation
- Locate the wedge slot: With the Foonf installed rear-facing, reach under the front of the seat base. You'll see a rectangular opening near the front edge. This is the dedicated slot for the wedge. Common mistake: Trying to force the wedge into the wrong opening. It only fits one way.
- Insert the wedge: Hold the wedge with the curved side facing up and the flat side facing down. Slide it into the slot until you hear a click. The wedge should sit flush against the base. Checkpoint: If it doesn't click, remove and reinsert. Never use force.
- Verify the recline angle: After insertion, check that the seat is level. The built-in recline indicator on the side of the Foonf should show green for rear-facing. If not, adjust the wedge position or remove it and try a different angle. Checkpoint: The wedge is not adjustable once inserted. If the angle is still off, you may need to remove it and reinstall the seat with a different base angle.
- Secure the wedge latch: Push the wedge fully into the slot until the latch engages. Give it a gentle tug to confirm it's locked. The wedge should not slide out when you pull on it. Final check: A loose wedge can affect the recline angle. Always test the latch before driving.
Product details
- Foonf Rear-Facing Wedge: Ride safe. Ride right. Ride on. The Foonf Rear-Facing Wedge is a replacement part designed to adjust the recline angle of the Clek Foonf convertible car seat when used rear-facing. It gives you a simple way to achieve the correct rear-facing recline for your child's age and size, without compromising the seat's safety features.
