Quick answer
Wash your fritz-kola bandana inside out in cold water on a gentle cycle, then air dry away from direct sun to protect the organic cotton and the all-over print.
Why gentle care matters for organic cotton prints
The fritz-kola bandana is made from 100% organic cotton and GOTS-certified, which means no harsh chemicals were used in production. That’s great for the planet, but it also means the fabric is more sensitive to high heat and aggressive detergents than conventional cotton. The all-over print is applied to the surface, so rough washing can cause fading or cracking over time.
Because the bandana is 60 x 60 cm and can be worn as a head scarf, neck tie, or face covering, it sees a lot of friction and exposure. A little extra care during washing and drying will keep the colors bright and the fabric soft.
How to care for your fritz-kola bandana
- Turn it inside out before washing: This protects the printed side from direct friction against other clothes or the machine drum. Close any loose threads or ties to prevent snagging. A common mistake is washing it right-side out, which accelerates print fading.
- Use cold water and a gentle cycle: Set your machine to cold (below 30°C / 86°F) and choose the delicate or hand-wash cycle. Use a mild liquid detergent without bleach or fabric softener, as softeners can coat the cotton fibers and reduce absorbency. Hot water can shrink organic cotton and dull the print. Stick to cold.
- Air dry flat, away from direct sunlight: Lay the bandana flat on a clean towel or hang it in the shade. Do not wring it out, as twisting can distort the shape and damage the print. Avoid the dryer entirely, because high heat can shrink the cotton and cause the ink to crack. Sunlight can bleach the colors over time, so drying indoors or in shade is best.
- Iron on low if needed: If the bandana comes out wrinkled, iron it on the lowest setting while it is still slightly damp. Always iron on the reverse side to avoid direct heat on the print. Never use steam or a hot iron directly on the printed side, as it can melt or lift the ink.
Product details
-
fritz-kola bandana: The fritz-kola bandana is 60 x 60 cm, made from 100% organic cotton, and GOTS-certified. The organic cotton is softer and more breathable than conventional cotton, but it needs gentle washing to avoid shrinkage and preserve the print.
fritz-kola bandana
