Quick answer

The fritz-kola jigger doodle helps you measure spirits and mixers accurately for balanced cocktails. Use the marked lines on both ends to pour exact amounts, then combine in your shaker or glass.

Why precision matters in cocktail mixing

A great cocktail depends on the right balance of ingredients. Guessing pours leads to inconsistent drinks — too strong, too sweet, or just off. The fritz-kola jigger doodle takes the guesswork out, giving you clean, repeatable measurements every time. It's especially useful when you're trying a new recipe or serving multiple guests.

Getting to know your jigger doodle

The jigger doodle has two conical ends, each with a marked fill line. One side typically holds a standard shot (1.5 oz or 45 ml), the other a smaller measure (0.75 oz or 20 ml). The doodle pattern on the outside adds grip and a bit of fritz-kola personality to your bar setup.

How to measure and mix with the fritz-kola jigger doodle

  1. Step 1: Choose the right side: Decide which volume you need — the larger end for main spirits, the smaller end for modifiers like vermouth or citrus juice. Hold the jigger by the middle ridge so your hand doesn't warm the metal. Common mistake: Using the wrong end for a recipe. Always double-check the recipe's measurements before pouring.
  2. Step 2: Fill to the brim: Pour your ingredient into the jigger until it reaches the top edge. The liquid should form a slight dome (meniscus) but not overflow. Pour slowly to avoid air bubbles that throw off the volume. Checkpoint: If the liquid is below the rim, you're under-pouring. Level it off with a straight edge if needed.
  3. Step 3: Transfer to your mixing vessel: Tip the jigger over your shaker or mixing glass and let the liquid flow out completely. A quick wrist flick helps release every drop. Rinse the jigger between different ingredients to avoid flavor crossover. Common mistake: Leaving a few drops behind — that small amount can unbalance a delicate recipe. Give it a gentle tap to empty fully.
  4. Step 4: Repeat for each ingredient: Measure each spirit, mixer, or syrup separately. Build the drink in the order the recipe specifies — usually spirits first, then modifiers, then juices or syrups. This keeps layers clean and makes stirring or shaking more effective. Pro tip: For drinks with multiple small measures, use the smaller end of the jigger to save time and reduce dishwashing.

Product facts

  • fritz-kola jigger 'doodle': Nicht raten. Messen. Dieser fritz-kola Jigger sorgt dafür, dass in deinem Drink genau das landet, was rein soll – nicht mehr und nicht weniger. Sauber ausbalanciert, liegt gut in der Hand und macht das Abmessen so unkompliziert, wie es sein sollte. Außen wird's etwas wilder: Verziert mit fritz-kola Doodles ist er ein echter Hingucker. The balanced design and clear markings help you measure accurately without spilling, and the doodle pattern makes it easy to spot on a busy bar counter.