Quick answer
Clean and oil your Gold Titanium X-Pro Wide Trimmer Blade after every use, avoid harsh chemicals, and store it dry to preserve its sharp edge and sensitive-skin performance.
Why Gold Titanium blades need special care
Gold Titanium blades use a convex and hollow grinding process (X-Pro sharpening) that delivers exceptional sharpness and balance. This edge is ideal for sensitive skin but requires gentle handling to avoid dulling or chipping.
The Black DLC "The One" Cutter also benefits from the same care routine. Its DLC coating resists corrosion but does not make it immune to debris buildup or friction damage.
7-step maintenance routine
- 1. Remove the blade assembly: Unplug the clipper and remove the trimmer blade and DLC cutter together. Keep the screws in a safe place. Working on a powered clipper can cause injury; always disconnect power first.
- 2. Brush off loose hair and debris: Use the included cleaning brush or a soft toothbrush to sweep hair from between the teeth and under the blade. Do not use metal tools. Metal tools can scratch the Gold Titanium surface and the DLC coating.
- 3. Blow out remaining particles: Use compressed air or a handheld blower to clear stubborn dust from the pivot area and blade gap. Hold the blade facing away from your face to avoid blowing debris into your eyes.
- 4. Apply a thin layer of clipper oil: Place one drop of lightweight clipper oil on the blade edge and one drop on the cutter pivot. Run the clipper for 10 seconds to distribute. Too much oil attracts dirt; one drop per point is enough.
- 5. Wipe off excess oil: Use a lint-free cloth to blot any oil that drips or pools on the blade surface. Leaving excess oil on the blade can transfer to the skin and cause irritation.
- 6. Reassemble and test: Reattach the blade and cutter, tighten screws evenly, and run the clipper for a few seconds to confirm smooth operation. Uneven tightening can misalign the blade and cause chatter or pulling.
- 7. Store in a dry place: Place the clipper in a clean, dry drawer or case. Avoid humid bathrooms and direct sunlight. Moisture can cause the DLC coating to degrade and the Gold Titanium edge to corrode over time.
Product details
-
Gold Titanium X-Pro Wide Trimmer Blade & Black DLC "The One" Cutter: X-Pro sharpening process uses convex and hollow grinding for perfect balance and superior sharpness. This means the edge is very sharp but also fragile; you must avoid dropping the blade or using abrasive cleaners.
Gold Titanium X-Pro Wide Trimmer Blade & Black DLC "The One" Cutter
