Quick answer
To apply Nailberry Golden Hour L'Oxygene polish flawlessly, start with a clean, dry nail, apply thin coats, and finish with a top coat for lasting vibrancy.
Why Golden Hour Needs a Gentle Touch
Golden Hour's yellow-gold pigment is opaque and vibrant, but like all shimmer polishes, it can show streaks if applied too thickly. The L'Oxygene formula is light and self-leveling, so thin sweeps are key to an even coat.
Step-by-step application for Golden Hour L'Oxygene
- Step 1: Prep your nails: Remove any old polish and wash hands to remove oils. Push back cuticles gently. A clean, dry base helps the polish adhere evenly. Skipping this step can cause chipping within a day.
- Step 2: Apply the first thin coat: Dip the brush and wipe one side against the bottle rim. Starting at the cuticle, sweep the brush in one stroke down the center, then one on each side. Keep the coat thin to avoid streaks. A common mistake is pressing too hard; let the brush do the work.
- Step 3: Let it dry completely: Wait at least 2 minutes between coats. The L'Oxygene formula dries quickly, but rushing leads to smudges and uneven layers. Test dryness by lightly tapping two nails together—they should feel smooth, not tacky.
- Step 4: Apply a second thin coat: Repeat the same sweeping motion. The second coat builds the opaque golden hue. If needed, a third coat can add depth, but two usually suffice for full coverage. If the polish looks thick, your first coat was too heavy.
- Step 5: Seal with a top coat: Apply a thin layer of Nailberry Shine & Breathe Top Coat to protect the color and add gloss. This also prevents the shimmer from dulling over time. Cap the free edge (the tip of the nail) to extend wear.
Product used in this guide
-
Golden Hour: This velvet-soft, delicately shimmering yellow-gold looks exquisite on all skin types, adding warmth and wonder to your holiday style, day or night. The shimmer requires careful application to avoid clumping; thin coats ensure the delicate sparkle spreads evenly.
Golden Hour
