Quick answer
The Gundam Marker 6 Pack Seed Basic Set gives you five chisel-tip markers for color and shading plus one fine-tip marker for panel lines, making it a versatile tool for detailing any Gundam SEED-style model kit.
Why the Seed Basic Set fits SEED kits best
The included colors are chosen to match the mobile suits from Mobile Suit Gundam SEED, so you can add accurate panel lines and shading without mixing paints. The chisel tips work well on larger armor parts, while the fine tip handles the small details on weapons and backpacks.
Trade-off: alcohol-based markers vs. paint
These markers are alcohol-based, which means they dry fast and bond well to bare plastic. However, they can bleed into fine panel lines if you press too hard, and they are not suitable for large flat surfaces where brush or airbrush gives a smoother finish. Stick to small details and panel lines for best results.
How to use the Gundam Marker 6 Pack Seed Basic Set
- Prepare your kit parts: Snip the parts from the runners, clean up nubs with a hobby knife or sanding stick, and wash the parts with mild soap to remove mold release. A common mistake is skipping the wash, which leaves oils that prevent the marker from adhering evenly.
- Test on a spare runner: Shake each marker for 10 seconds, then press the tip on a scrap piece of runner to see the ink flow and color intensity. This avoids surprises on your actual kit. A common mistake is starting directly on the kit and getting too much ink in one spot. If the ink pools, dab it with a cotton swab immediately.
- Apply panel lines with the fine tip: Use the fine-tip marker to trace panel lines, corners, and recessed details. Hold the marker at a 45-degree angle and let the ink flow into the groove. A common mistake is pressing too hard, which causes the ink to bleed outside the line.
- Add shading with chisel tips: Use the chisel-tip markers to add subtle shading along edges and around panel lines. Apply a thin layer and blend with your fingertip or a cotton swab while still wet. A common mistake is applying too much ink, which creates a thick, uneven patch. Work in small sections so the ink doesn't dry before you blend.
- Clean up excess ink: Wipe away mistakes or overflow with a cotton swab lightly dampened with isopropyl alcohol. Do this within a few minutes of application; once the ink dries completely, it becomes harder to remove without damaging the plastic. A common mistake is using too much alcohol, which can strip the plastic's finish.
- Let the kit cure before assembly: Allow the markers to dry for at least 30 minutes before handling the parts. For best durability, let the kit sit for 24 hours before posing or applying a top coat. A common mistake is assembling too soon, which smudges the fresh ink. A clear top coat (matte or gloss) protects the marker work and gives a uniform finish.
Product facts
-
Gundam Marker 6 Pack Seed Basic Set: The set includes five chisel-tip markers for smooth color application and shading, plus one fine-tip marker for sharp panel lines and precision work. You get both broad coverage for armor sections and a fine tip for tight panel lines without buying separate tools.
Gundam Marker 6 Pack Seed Basic Set
