Quick answer
Insert MP2 inserts into your plate carrier's magazine pouches by feeding them through the top opening and seating them at the bottom for secure, bungee-free retention.
Why use MP2 inserts on a plate carrier?
Standard rifle magazines can shift or fall out of open-top nylon pouches during movement, especially when worn on a plate carrier. MP2 inserts solve this by adding a friction fit inside the pouch, holding the magazine securely without the need for bungee cords or external retention straps. This keeps your reloads consistent and your gear streamlined.
Choosing the right pouch
MP2 inserts work with most standard rifle magazine pouches that have an open-top design. They are specifically sized for AR/AK pattern magazines and similar. Before installing, check that your pouch is made of flexible nylon and has a bottom seam or closed base to hold the insert in place. Avoid pouches with built-in rigid inserts or fixed dividers, as these may prevent proper seating.
How to install MP2 inserts on your plate carrier
- Prepare the pouch: Remove any existing magazine or insert from the pouch. Check that the interior is clean and free of debris. If the pouch has a bungee cord, you may remove it, but it's not required for MP2 inserts. A clean, empty pouch ensures the insert seats fully.
- Insert the MP2: Hold the MP2 insert with the open end facing up. Slide it into the pouch from the top, pushing it all the way down until it rests against the bottom seam. The insert should sit flush with the bottom of the pouch. If the insert catches, rotate it slightly to align the corners.
- Seat and test: Push a magazine into the pouch with the MP2 installed. It should slide in with moderate resistance and stay in place when you shake the carrier. If the magazine slips out, the insert may not be fully seated or the pouch is too loose. A properly seated insert will hold the magazine firmly without needing extra tension.
Product facts
-
MP2 Insert 4 Pack: The MP2 inserts allow most standard rifle magazines to be run in open top nylon pockets, without bungies or sacrificing retention of the magazine. This means you can use your existing pouches on a plate carrier and get reliable magazine retention without adding bulk or snag points.
MP2 Insert 4 Pack
