Quick Answer
Assemble the Action Base 6 by snapping the clear base parts together, then carefully apply the mirror stickers to the designated recessed areas for a clean reflective accent.
Why the Action Base 6 Stands Out
The Action Base 6 is designed for model kits and poseable figures, offering a stable display platform with a clear base that keeps the focus on your build. The included mirror stickers add a subtle reflective accent without overpowering the figure. Because the base is transparent, any fingerprints or dust will be visible, so handle the clear parts by the edges during assembly.
Step-by-Step Assembly Guide
- 1. Prepare Your Workspace and Parts: Lay out all clear base parts from the Action Base 6. Check the instruction sheet to identify each piece. Have a pair of sprue cutters ready if the parts are on runners. Work on a clean, soft surface to avoid scratching the clear plastic.
- 2. Assemble the Base Platform: Snap the main platform pieces together. The clear parts fit snugly, so apply even pressure at the joints. Do not force them—if a joint feels too tight, check that you have the correct orientation. A common mistake is mixing up the left and right platform halves; they are not symmetrical.
- 3. Attach the Support Arm: Insert the support arm into the base socket. The arm can be adjusted to different heights and angles. Lock it in place by pressing the tab until it clicks. Make sure the tab is fully engaged, or the arm may slip under the weight of a heavy model kit.
- 4. Apply the Mirror Stickers: Peel each mirror sticker from the sheet and place it into the recessed area on the base. Use tweezers for precise positioning. Press from the center outward to avoid air bubbles. If the sticker is misaligned, lift it gently with a hobby knife before it fully adheres—do not pull it off quickly or it may tear.
- 5. Mount Your Figure or Model Kit: Attach your figure or model kit to the support arm using the included adapter parts. Ensure the adapter fits snugly into the figure's peg hole or backpack port. For heavy kits, double-check that the support arm is locked at its lowest angle to prevent tipping.
Product Facts
-
Action Base 6 [Clear] Mirror Stickers Set: This Action Base 6 [Clear] Mirror Stickers Set from Bandai includes a clear base and mirror stickers to add a reflective accent to your setup. The clear base keeps your figure the center of attention, while the mirror stickers provide a subtle reflective backdrop that enhances the display without distracting from the model.
Action Base 6 [Clear] Mirror Stickers Set
