Quick Answer

Charge your TENGA paiRING or SVR device by connecting the magnetic charging cable to the toy and plugging the USB end into a standard 5V adapter. For paiRING models, you can also swap or replace the charging case to keep a backup ready.

Understanding Your Charging Options

TENGA paiRING and SVR devices use a magnetic charging cable that snaps onto the contact points on the toy. The cable is included with your original purchase. If you lose or damage it, any compatible replacement cable from TENGA will work.

For paiRING models, the charging case itself is a separate accessory that can be swapped for a different color or kept as a spare. The case does not contain a battery; it simply holds the toy while charging via the same magnetic cable.

Step-by-Step Charging Guide

  1. Connect the Magnetic Charging Cable: Take the magnetic charging cable and align the connector with the contact points on the bottom or side of your TENGA paiRING or SVR device. The magnet will pull it into place. Ensure the cable is fully seated and not crooked. A crooked connection may not charge; the LED indicator will not light up.
  2. Plug Into a Power Source: Insert the USB end of the cable into a standard 5V USB wall adapter, computer port, or power bank. Do not use a fast-charging adapter rated above 5V unless the device manual explicitly allows it. Using a high-voltage charger can damage the battery or reduce its lifespan.
  3. Check the Charging Indicator: Look for the LED light on the device. A steady red or orange light means charging is in progress. A green or blue light (or the light turning off) indicates a full charge. Refer to your manual for exact color codes. If the LED does not turn on, recheck the cable connection and power source.
  4. Charge Until Full: Leave the device connected until the indicator shows a full charge. Typical charging time is 1–2 hours, but always follow the time stated in your product manual. Overcharging is prevented by the internal circuit, but unplugging once full is still good practice. Do not leave the device plugged in for more than 24 hours continuously.
  5. Store or Use the Charging Case (paiRING Only): If you own a TENGA paiRING, you can place the toy into its charging case after charging. The case does not charge the toy; it only holds it. To charge while in the case, connect the magnetic cable to the case's external contact points. The charging case is not a battery pack; it is a holder with pass-through charging contacts.

  • TENGA paiRING+ Charging Case: This is a replacement or spare charging case for the TENGA paiRING+ Series, available in four colors. Having a spare case lets you keep one at home and one in a travel bag, so you never forget the charger.

    TENGA paiRING+ Charging Case

    TENGA paiRING+ Charging Case

  • TENGA paiRING Charging Case: This is a replacement or spare charging case for the TENGA paiRING Series, available in four colors. If your original case gets scratched or you want a fresh look, swapping the case is a quick and affordable upgrade.

    TENGA paiRING Charging Case

    TENGA paiRING Charging Case