Quick answer
Clean your silicone fantasy dildo with warm water and a mild, fragrance-free soap before and after every use, then dry it completely and store it separately in a breathable pouch. Avoid silicone-based lubricants and harsh chemicals, which can degrade the surface. If your toy has motors or a remote, keep the electrical parts dry and remove batteries when storing.
Why silicone needs its own cleaning routine
Silicone is non-porous, which makes it one of the easiest sex toy materials to clean thoroughly. That non-porous surface also means residue from lubricants, body fluids, or dust sits on top rather than soaking in, so a consistent wash removes almost everything. But silicone can still be damaged by the wrong products: silicone-based lubricants may bond with the surface and create a tacky film, and abrasive cleaners can scratch the finish. If your toy includes electronic parts, such as the wireless remote on the Nexus Maw 4.7”, water exposure must be limited to the silicone shaft only. Always check whether the toy is fully waterproof before rinsing; if that detail is not in the product description, treat it as splash-resistant and wipe rather than submerge.
Gather the right supplies before you start
You do not need a cabinet full of specialty products. A mild, unscented liquid soap (like baby wash or a gentle hand soap) works for most silicone toys. If you prefer a dedicated toy cleaner for silicone, choose one labeled alcohol-free and silicone-free. You will also want a soft, lint-free cloth or a clean towel, and a storage pouch or box that lets air circulate. For toys with removable parts, such as the Armored Titan 6.3” with its textured spiral shaft and motorized thrusting, check the manual for specific cleaning boundaries—usually the silicone sleeve can be washed while the mechanical base stays dry. Never use boiling water, dishwashers, or bleach on silicone unless the manufacturer explicitly says it is safe.
Step-by-step cleaning and storage
- Rinse the silicone surface with warm water: Hold the toy under lukewarm running water to remove loose residue. If the toy has a motor or remote, do not submerge it—wipe the silicone part with a damp cloth instead. Checkpoint: water should feel comfortably warm, not hot. Hot water can degrade silicone over time.
- Wash with mild, unscented soap or toy cleaner: Apply a small amount of soap to your hand or a soft cloth and gently rub the entire silicone surface, including any ridges or curves. For textured toys like the Armored Titan 6.3”, use a soft brush (like a clean toothbrush) to reach into the spiral grooves. Mistake to avoid: using antibacterial soap with added moisturizers or fragrances, which can leave irritating residue.
- Rinse thoroughly and check for residue: Rinse under warm water until no soapy film remains. Run your fingers over the surface—it should feel squeaky clean, not slippery. Pay attention to the base and any seams. Checkpoint: if it still feels slick, rinse again. Soap residue can cause irritation.
- Dry completely with a lint-free cloth: Pat dry with a clean, soft towel or let it air dry on a clean surface. Make sure no moisture remains in crevices or around buttons. For toys with a remote, dry the remote separately with a dry cloth. Mistake to avoid: storing while damp. Trapped moisture encourages mold and can damage electronics.
- Store separately in a breathable pouch or box: Place the fully dry toy in a fabric pouch or a dedicated storage box. Keep it away from other silicone toys if possible, as some silicone blends can interact and become tacky. Store in a cool, dark place. Checkpoint: do not seal in an airtight plastic bag for long periods; silicone needs to breathe.
- Remove batteries from electronic toys before storage: If your toy uses batteries (like some remotes), take them out to prevent corrosion. For rechargeable toys, charge to about 50% before long storage. Mistake to avoid: leaving batteries in for months. Leaks can ruin the toy.
Product facts to keep in mind
- Nexus Maw 4.7”: Nexus Maw 4.7” features a wireless remote control with 10 vibration and expansion functions and is made from high-quality silicone. The remote and motor mean you should keep the electrical components away from water; clean only the silicone portion and store the remote separately.
- Armored Titan 6.3”: Armored Titan 6.3” has a textured spiral shaft and 2cm auto-retractable thrusting with 8 vibration and rotation modes, made from soft liquid silicone. The textured surface and mechanical parts require gentle cleaning around the spiral grooves; avoid submerging the motorized base and remove batteries if possible before storage.
