Quick Answer
Clean your 3D Totoro lens case daily with fresh multipurpose solution, not water, and store it dry in a cool, ventilated place. Replace the case every 3 months.
Why the 3D Totoro Design Needs Special Care
The raised 3D Totoro surface can trap moisture and debris more easily than a flat case. If you skip thorough drying, bacteria or mold may grow in the crevices. That is why a gentle but complete cleaning routine matters even more for this cute lens case.
Water vs. Solution: A Critical Difference
Tap water contains microorganisms that can survive in the case and later transfer to your lenses. Always use fresh contact lens solution for rinsing and soaking. The included transparent storage case and Totoro case both need solution-only care.
Step-by-Step Cleaning & Storage Routine
- Step 1: Rinse with fresh solution: After removing your lenses, empty the old solution from both the transparent case and the Totoro case. Rinse each compartment and the lid with fresh multipurpose contact lens solution. Do not use water. Common mistake: using tap water. Always use fresh solution.
- Step 2: Gently rub the surfaces: Use clean fingers to rub the inside of each case compartment and the 3D Totoro figure gently. This loosens any protein deposits or debris. Pay extra attention to the raised Totoro details. Common mistake: rubbing too hard can scratch the case. Use light pressure.
- Step 3: Air-dry upside down: Place both cases and the lid upside down on a clean, lint-free tissue. Let them air-dry completely with the caps off. Never seal the case while still wet. Common mistake: closing the case while damp traps moisture and breeds bacteria.
- Step 4: Store in a clean, dry place: Once fully dry, close the cases and store them in a cool, ventilated area away from direct sunlight and humidity. Keep the lens applicator and tweezers clean as well. Common mistake: storing in a bathroom cabinet where humidity is high.
- Step 5: Replace every 3 months: Even with perfect daily cleaning, replace your 3D Totoro lens case every three months. Scratches and wear over time create hiding spots for bacteria that cleaning cannot remove. Set a calendar reminder to swap cases regularly.
Product Facts
-
3D Totoro Lens Case: The 3D Totoro Lens Case includes a transparent storage case, Totoro-themed case, lens applicator, and tweezers. It measures 6.5 x 2.5 cm and weighs 30 g. The compact size and multiple pieces mean you have more surfaces to clean and dry; each component requires the same solution-only care to stay hygienic.
3D Totoro Lens Case
