Quick Answer
Use a wooden dowel and small nails or adhesive hooks to hang your Hickory Crawdads wool pennant flat against the wall. This keeps the fabric taut, prevents sagging, and lets you swap it out easily.
Why Mounting Method Matters
A wool pennant is heavier than a typical fabric flag, so the mounting method affects both appearance and longevity. Nailing directly through the fabric can create permanent holes and weaken the wool over time. Using a dowel or a clip system distributes the weight evenly and keeps the pennant's shape.
If you plan to rotate decorations seasonally, choose a method that doesn't require removing nails from the wall each time. Adhesive hooks or a removable hanging rail give you flexibility without damaging your walls or the pennant.
Consider the Location
Direct sunlight can fade the vibrant appliqué details on your pennant over time. Choose a wall that doesn't get harsh afternoon sun, especially if you're displaying it in a game room or office with large windows. Also, avoid areas with high humidity, like a bathroom, to prevent the wool from absorbing moisture.
For a classic look, place the pennant at eye level so the embroidered details are easy to appreciate. In a game room, you might group it with other team memorabilia, but give it enough space to stand out.
How to Hang Your Pennant in 5 Steps
- Gather your supplies: You'll need a wooden dowel or a metal clip hanging system, small nails or adhesive hooks, a measuring tape, and a level. If using a dowel, it should be slightly longer than the 32-inch width of the pennant so it extends a bit on each side. Check that your adhesive hooks are rated for the weight of the pennant plus the dowel.
- Attach the dowel to the pennant: Slide the dowel through the banner pass-through at the top of the pennant. If the opening is too snug, use a clip system that grips the fabric edge instead. Make sure the dowel is centered so the pennant hangs evenly. Do not force the dowel through if it's too tight—this can stretch the wool and distort the shape.
- Mark the wall for mounting: Hold the pennant against the wall in the desired position. Use a pencil to lightly mark where the dowel or clips will sit. Use a level to ensure the marks are straight, especially if you're hanging it alone without other items to reference. Measure twice and mark lightly—pencil marks are easier to erase than a misplaced nail hole.
- Install the hardware: If using nails, hammer them into the marked spots at a slight upward angle for a more secure hold. If using adhesive hooks, clean the wall surface with rubbing alcohol and press firmly for 30 seconds. Wait at least an hour before hanging the pennant to let the adhesive bond. For drywall, use a wall anchor if you're hanging anything heavier than a lightweight pennant.
- Hang and adjust: Place the dowel or clips onto the hardware. Step back and check that the pennant hangs straight and is not twisted. Adjust the position of the clips or the dowel if needed. If the pennant sags in the middle, consider adding a second clip at the bottom center for extra support. Once it's straight, give the pennant a gentle tug to make sure it's secure before leaving it unattended.
Product Spotlight
-
Hickory Crawdads Red and Black Wool Pennant: This Hickory Crawdads pennant measures 13" x 32" and is made from a wool-blend fabric with embroidered appliqué details. The size and fabric weight mean you need a sturdy mounting method that won't stretch or tear the material, like a dowel or clip system.
Hickory Crawdads Red and Black Wool Pennant
