Quick answer
To fit a nappy bin refill cassette, open the bin lid, remove the empty cassette, align the new Sangenic XL Nappy Wrapper Cassette Refill with the internal guides, snap it into place, thread the film through the cutter, and close the lid.
Why proper fitting matters
A correctly fitted cassette ensures the bin seals odors effectively and uses the refill film without jamming. Misalignment can cause the film to tear or the bin to not close properly, leading to odors and waste.
Step-by-step guide to fitting a nappy bin cassette
- Open the bin and remove the empty cassette: Press the foot pedal (if equipped) or lift the lid. Pull the empty cassette straight up and out. Dispose of it according to local waste rules. Check that the bin interior is clean and free of debris before inserting a new cassette.
- Align the new cassette with the internal guides: Hold the new Sangenic XL Nappy Wrapper Cassette Refill so the film opening faces the front of the bin. Lower it into the bin until the side tabs click into the grooves on the bin walls. If the cassette does not click into place, rotate it 180 degrees—it only fits one way.
- Thread the film and close the lid: Pull a few inches of film from the cassette. Locate the film cutter or sealing bar (usually inside the lid or along the rim). Feed the film through the cutter slot, then close the lid firmly until it latches. Tug the film gently after closing the lid to confirm it is properly seated and not twisted.
Product fact
-
Sangenic XL Nappy Wrapper Cassette Refills x6: Each case contains 6 cassettes, designed for use ONLY in Sangenic XL Nappy Disposal Bins (available separately, code 948). Using the correct refill ensures a perfect fit and reliable odor-sealing performance; incompatible refills may not lock in place or could damage the bin mechanism.
Sangenic XL Nappy Wrapper Cassette Refills x6
