Quick answer
Attach the eZeClip collar attachment directly to your pet tag using the built-in split ring, then clip it onto the collar—no separate ring or tools needed.
Why use an eZeClip instead of a traditional ring?
An eZeClip combines a split ring and a snap clip in one piece, so you skip the extra step of threading a separate ring through the tag hole. This makes it faster to swap tags between collars or remove the tag when you want a quieter walk. The clip also holds the tag flat against the collar, reducing dangling and jingling.
What to watch out for
The eZeClip works with most standard collars, but very thick or padded collars may make the clip feel tight. Check that the clip snaps fully shut—if it sits half-open, it could slip off during active play. The split ring included with the clip is strong stainless steel, but avoid over-stretching it when opening.
Step-by-step: Fitting the eZeClip
- Open the split ring: Gently pry the split ring open using your thumbnail or a flat edge. Slide the ring through the hole on your pet ID tag. Common mistake: pulling the ring too wide can weaken the metal; only open it enough to pass through the tag.
- Attach the eZeClip to the tag: With the split ring already through the tag, slide the ring onto the small loop at the base of the eZeClip. Ensure the ring sits fully inside the loop before releasing. Common mistake: leaving the ring half-on can cause the tag to dangle loosely. Check that the split ring is fully seated in the loop before moving on.
- Clip onto the collar: Press the spring-loaded clip open and hook it around your pet's collar. Release the clip so it snaps shut. Tug gently to confirm it is secure. Common mistake: clipping onto a loose section of collar near the buckle can let the tag slide; position the clip on a flat, snug part of the collar. Test the clip by giving a light pull—if it stays put, you are done.
- Remove or swap the tag (optional): To remove the tag, press the clip release and unhook from the collar. To swap tags, open the split ring instead of removing the clip from the collar. Common mistake: forcing the clip open repeatedly at the hinge can wear it out; use the split ring for tag changes. Use the split ring for tag swaps to extend the life of the clip.
Product details
-
eZeClip collar attachment [Black Heart]: Includes a strong stainless steel split ring to keep the tag in place, and the clip itself can easily fix to any collar. You get both the ring and clip in one product, so there is no need to buy or find a separate split ring for attachment.
eZeClip collar attachment [Black Heart]
