Quick Answer

To fit a carrycot raincover on a Mountain Buggy, unfold the cover, position it over the hood and carrycot, secure the elastic edges, and adjust the straps to keep it snug. Always check that the cover doesn't obstruct ventilation or your view.

Why a custom fit matters

A raincover that fits properly stays in place during walks and doesn't flap in the wind. The Carrycot Raincover Compatible With Mountain Buggy is custom-made for all Mountain Buggy carrycot models, so it aligns with the hood and carrycot shape, giving you a clear view of your baby while keeping rain out.

Using a generic cover may leave gaps at the edges or require folding that can stress the fabric. A tailored cover reduces these issues and makes installation quicker.

Step-by-Step Fitting Guide

  1. Unfold and Prepare: Take the raincover out of its storage bag and unfold it completely. Identify the top and bottom edges—usually the wider part goes over the hood. Check that the cover is not twisted before you start.
  2. Position Over the Carrycot: Drape the cover over the carrycot, starting from the front (foot end) and pulling it back over the hood. Make sure the cover sits symmetrically, with equal fabric on both sides. Center the cover to avoid pulling it tight on one side.
  3. Secure the Elastic Edges: Tuck the elastic edges under the carrycot rim or over the hood, depending on the design. Ensure the elastic is evenly distributed so the cover is taut but not stretched to the point of stressing the seams. Avoid overstretching the elastic; it should hold without force.
  4. Attach Any Straps or Clips: If your cover has straps or clips, fasten them around the carrycot frame or handles. Adjust the tension so the cover doesn't flap but also doesn't compress the carrycot padding. Ensure straps are not pressing on your baby's face.
  5. Check Visibility and Ventilation: Sit or stand in front of the pram and confirm you can see your baby clearly through the transparent panel. Also check that air can circulate—usually via vents or gaps—to prevent overheating. If visibility is blocked, reposition the cover rather than leaving it.

Product Facts