Quick answer

To insert and remove 1-day colored contacts safely, always wash and dry your hands, inspect the lens before placing it on your eye, and use a pinch-and-slide method for removal—never pull or scratch.

Why 1-day colored contacts need special handling

1-day colored contacts are designed for single use, which means they are thinner and more delicate than longer-wear lenses. This makes proper handling even more important to avoid tearing or discomfort.

Because they are daily disposables, you don't need to worry about cleaning or storing them. But you still need to keep your hands clean and your eyes healthy—so follow the steps below every time.

Step-by-step safe insertion and removal

  1. Wash and dry your hands: Wash your hands with soap and water, then dry them with a lint-free towel. Avoid oily or creamy soaps that can leave residue on your fingers. Never handle lenses with wet or dirty hands.
  2. Inspect the lens before insertion: Place the lens on your fingertip and check that it is not inside out. The edges should form a nice bowl shape, not flare outward. Also look for any tears or debris. If the lens is damaged, discard it and use a fresh one.
  3. Insert the lens gently: Hold your upper eyelid open with one hand and pull down your lower eyelid with the other. Look up or straight ahead, then place the lens on the colored part of your eye. Blink slowly to settle it. Don't press hard—let the lens sit naturally.
  4. Remove the lens with a pinch-and-slide: Look up, then use your index finger to slide the lens down to the white part of your eye. Gently pinch the lens with your thumb and index finger and lift it away. Never pinch the lens directly off the cornea. If the lens feels stuck, add a few drops of contact lens solution and blink before trying again.
  5. Dispose of the lens immediately: After removal, throw the lens in the trash. Do not reuse it, even if it looks clean, because it is no longer sterile and can cause eye irritation. Always have a spare pair if you need to replace a lens mid-day.

Products mentioned in this guide

  • 247Bom 1Day Brown: 247Bom 1Day Brown has a total diameter of 14.2mm, a graphic diameter of 13.4mm, and a water content of 50%. The higher water content can make the lens slightly more flexible, so gentle handling is especially important to avoid tearing.

    247Bom 1Day Brown

    247Bom 1Day Brown