Quick answer
Press the Fred Safety plug socket cover firmly onto a standard UK socket until it clicks. No tools or drilling needed—just align the cover and push.
Why the Fred cover stays put
Unlike universal covers that rely on friction alone, the Fred Safety plug socket cover uses an extra-tight fit and bevelled edges to prevent little fingers from prying it off. The smooth, no-grip surface gives toddlers nothing to hold onto, so the cover stays secure even during curious attempts to remove it.
What you need before you start
You only need the Fred Safety plug socket cover itself—each pack includes six covers. No screwdriver, adhesive, or special tools required. Ensure the socket is clean and dry; dust or moisture can reduce the grip slightly.
Step-by-step installation
- Step 1: Check the socket: Make sure the socket is switched off (if it has a switch) and that the surface is clean and dry. A dusty or greasy socket can reduce the cover's grip. A quick wipe with a dry cloth is enough—no cleaning chemicals needed.
- Step 2: Align the cover: Hold the Fred Safety cover with the bevelled edge facing outward. Line it up squarely over the socket faceplate—the cover should sit flush against the plate without tilting. If the cover feels crooked, lift it off and realign before pressing down.
- Step 3: Press firmly into place: Push the cover onto the socket using the palm of your hand until you hear or feel a click. The entire cover should sit flat against the faceplate with no gaps. A common mistake is pressing only the centre—use even pressure across the whole cover for a secure fit.
- Step 4: Test the fit: Try to pull the cover off with your fingertips. It should not budge. If it comes off easily, repeat step 3 with more even pressure. To remove, use the two-step lift-and-pull method: lift one edge slightly, then pull the cover away. If the cover still feels loose, check that you are using the correct size for UK sockets—Fred covers are designed for standard UK faceplates.
About this product
-
Fred Safety Plug Socket Cover (x6): The Fred Safety plug socket cover features a smooth no-grip design, extra tight fit, and bevelled edges to prevent toddlers from grasping and tampering. This design means the cover stays securely in place without adhesives, and you can remove it easily with the two-step lift-and-pull method when needed.
Fred Safety Plug Socket Cover (x6)
