Why Choose Half-Log Edging for Your Garden Border
Half-log edging gives your garden or walkway a natural, rustic look while keeping mulch, grass, and soil where they belong. Greenes flexible half-log lawn edging is designed to follow curves, circles, or straight lines, so you can shape borders around flower beds, trees, or planter boxes without rigid corners.
Each 18-inch section has a staggered height of 5 to 7 inches, creating a varied, organic appearance along the edge. Built-in metal stakes make installation straightforward for most DIY gardeners.
What You Need Before You Start
Gather a rubber mallet or hammer, a garden hose or string (to mark your layout), and your choice of Greenes half-log edging sections. The edging is available in a 6-pack or 12-pack, so measure your border length first. Each section is 18 inches long, so a 12-pack covers about 18 linear feet.
No special tools are required — just a way to tap the stakes into the ground and something to outline your desired shape.
Step-by-Step Installation
Follow these steps to install your cedar half-log edging securely.
- Mark the Border Line: Lay a garden hose or string along the intended edge. Adjust the curve or straight line until the shape looks right. This guide will help you position each section accurately.
- Position the First Section: Place the first half-log section at the start of your marked line. The staggered height (5 to 7 inches) should face upward, with the metal stakes pointing down into the soil.
- Tap the Stakes into the Ground: Using a rubber mallet or hammer, gently tap the metal stakes until the edging sits firmly in the soil. Keep the top edge level with or slightly above the ground, depending on your desired border height.
- Add Subsequent Sections: Butt the next section against the first, aligning the ends. Tap its stakes into place. The flexible backing allows you to follow curves naturally — just angle each section slightly as you go.
- Check Alignment and Adjust: After every few sections, step back and check the line. If a section is out of position, gently pull it out and reposition it before fully securing the stakes.
Product Specifications
-
Wooden Half Log Staggered Lawn Edging 18 in x 7 in RC32B: Each 18-inch long section has a staggered height of 5 to 7 inches and includes metal stakes for easy installation. The staggered height creates a natural, uneven look, and the pre-attached stakes save time — no separate fasteners are needed.
Wooden Half Log Staggered Lawn Edging 18 in x 7 in RC32B
-
Wooden Half Log Staggered Lawn Edging 18 in x 7 in RC32B: The flexible backing allows installation in a circle, curve, or straight line. You can shape the border exactly to your garden design without cutting or special connectors.
Tips for a Professional-Looking Border
For a clean finish, keep the top of the edging at a consistent height relative to the ground. If your soil is hard, water it lightly before installation to make stake insertion easier. The half-log edging works well for containing mulch, grass, planter boxes, and tree rings — but avoid using it as a structural retaining wall for heavy soil loads.
Overlap the sections slightly if you want a denser look, or leave a small gap between them for a more open border. The flexible backing handles gentle curves without kinking.



