Quick Answer
To install the Diaper Genie XL Octagonal Refill, open your pail, remove the old refill, align the octagonal cartridge with the pail's opening, push it down until it clicks, then thread the film through the cutting mechanism and close the lid.
Why the Octagonal Refill Fits Only XL Pails
The Diaper Genie XL Octagonal Refill is shaped specifically for Diaper Genie XL pails. Its octagonal design ensures a snug fit that prevents the cartridge from shifting during use. If you have a Classic or Elite pail, this refill won't lock into place correctly.
Always check your pail model before buying. The refill is not interchangeable with other Diaper Genie models, so using it in a non-XL pail can cause the film to jam or tear.
What to Do If the Refill Doesn't Click Into Place
If the octagonal refill doesn't click when you push it down, the pail may still have a partially used refill inside. Remove any remaining cartridge completely before inserting the new one.
Also check that the pail's locking tabs are not obstructed by debris or old film. A quick wipe with a dry cloth usually solves this.
Step-by-Step Installation Guide
- Open the pail and remove the old refill: Press the foot pedal to open the lid. Lift the old cartridge straight up and discard it. If the film is still attached, cut it with the built-in cutter before removing. Common mistake: Forgetting to cut the film first can pull the entire roll out of the cartridge.
- Align the octagonal refill with the pail opening: Hold the new Diaper Genie XL Octagonal Refill so its octagonal shape matches the pail's interior. Lower it straight down until you hear a click, indicating it's locked in place. Checkpoint: If it doesn't click, rotate the refill 45 degrees and try again. It should only fit one way.
- Thread the film through the cutting mechanism: Pull the end of the multi-layer film out of the cartridge. Open the cutting slot on the pail's rim, insert the film, and close the slot. Ensure the film hangs freely inside the pail. Common mistake: Twisting the film before threading can cause jams. Keep it flat.
- Close the lid and test the mechanism: Press the foot pedal to close the lid. Push a small amount of film through by pressing the pedal again. The film should advance smoothly without resistance. Checkpoint: If the film doesn't advance, reopen the lid and check that the cutting slot is fully closed.
Product Details
-
Diaper Genie® XL Octagonal Refill: The Diaper Genie® XL Octagonal Refill uses continuous multi-layer film and holds up to 810 newborn-sized diapers. You'll change the refill less often, and the multi-layer film helps lock odors inside the pail between changes.
Diaper Genie® XL Octagonal Refill
