Quick answer
Install the KTS Triple 556 by inserting it into a compatible kangaroo pocket or attaching it under a Slickster cummerbund using the ADAPT system.
What You Need to Know Before Starting
The KTS Triple 556 is designed to work with the ADAPT system, so you don't need extra adapters for most setups. It fits inside kangaroo pockets that are at least 9.75 inches wide internally, such as those on the LBT 6094 or Mayflower APC. If your plate carrier has a different pocket width, the KTS may not fit without modifications.
The KTS uses Haley Strategic MP2 magazine retention inserts that click into place. This design allows you to insert magazines with bullets facing forward or backward, giving you flexibility in your reload technique. The inserts deliver a smooth draw, but they do require a firm push to seat the magazine fully.
Steps to Install the KTS Triple 556
- Check Your Carrier Compatibility: Measure the internal width of your kangaroo pocket. It must be at least 9.75 inches wide to accept the KTS. Common compatible carriers include the Slickster, LBT 6094, and Mayflower APC. If the pocket is narrower, the KTS will not fit securely. Consider using a different mounting method or carrier.
- Insert the KTS into the Kangaroo Pocket: Slide the KTS Triple 556 into the kangaroo pocket from the top. Ensure the retention inserts are facing outward for easy access. Push it down until it sits flush with the bottom of the pocket. Do not force it if you meet resistance. Check for obstructions or folds in the fabric that might block insertion.
- Secure the KTS Under the Cummerbund (Alternative Method): If your carrier does not have a kangaroo pocket, attach the KTS directly under the Slickster cummerbund. Align the hook-and-loop backing on the KTS with the loop field on the cummerbund. Press firmly to secure. Make sure the KTS is centered and stable. An off-center mount can cause the pouch to shift during movement.
- Insert Magazines and Test Draw: Place your magazines into the MP2 inserts with bullets facing forward or backward as preferred. Practice drawing a few times to ensure the inserts release smoothly and the pouch stays in place. If the inserts feel too tight or too loose, adjust the tension by slightly bending the insert tabs. Avoid over-tightening, which can slow your reload.
Product Facts
-
KTS Triple 556: The KTS was designed to attach directly under the Slickster cummerbund or insert into the ADAPT Kangaroo Front Flap or other kangaroo pockets with a 9.75" wide or larger opening on the inside. This means you can mount the pouch without extra hardware on compatible carriers, but you must measure your pocket width first to ensure a proper fit.
KTS Triple 556
